[ipcsr76]

- Can i use this tutorial for my E63 coupe 03/2008 635D CV16548 ?

Yes, if you have retrofitted CIC and combox. This tutorial is for CIC and car must also have combox to get apps. I added specific chassis models to the guide.

- The files attached in this post are correct for my car?

Yes, E60 is correct.

- Can i use "interface" fonction in DR GINI software (B13 version) for configure ICOM for MOST_ASYNC_ab625 and write EDABIAS.INI file ?

Probably yes. I have never tried with dr gini, I always use easy connect. You want to configure ediabas.ini for remote:most_async_ab625 so I can't see why it wouldn't work, if the software gives you an opportunity to configure ediabas.

- ICOM selection + MOST selection : it's good choice?

I don't understand this question.

I still remind, you must have some knowledge about winkfp use. This guide is not for those who have never used winkfp. Start with basics, downgrading cic is not basics.

Thanks you

My car is in full original equipement...

I have a CCC not a CIC.... (Cd and DVD drive)

I have BT, USB, AUX, BMW services...

Your files it's good for my configuration?

Thanks.

[ap90500]

I already answered to another topic. BMW Apps requires CIC + combox, your car has CCC + MULF2 High + TCU. You can't get BMW Apps or bluetooth streaming with your current configuration.

[nader_h]

Please any one can provide us with a step by step with pictures how to

[nader_h]

We need video how to or a document with print screens because i don't want to miss a step because it is critical

[ap90500]

There is a user guide in winkfp doku-folder, it explains how the expert mode is used.

[emhtuning]

Looks like PSDZdata V41 or V42 is hard to find by search , any chance someone has a link to download somehow ,

[ClockW]

Firstly, many thanks for the guide and the software.

If I "downgrade" to V41 and install apps then if I then "upgrade" my CIC software do the Apps stay enabled?

Best regards

CW

[ap90500]

I have not seen v41 or v42 psdzdata. Of course I am interested about these too.

No, can't update after downgrade. Newer software will require FSC for apps.

[emhtuning]

@ap90500
Thanks, forgotten the zusb handling, you are right, it will not work with E Series.

@ehssan
Sure it works with F Series, did it several times.
Very easy to handle. Change with Esys via vcm the I Level actual and last, to a lower one than the ista p version you like to use for downgrade.You can set them to shipping level for example.But surely don t change shipment level!

After that ista p will flash your car after making measurement plan.

@Hulahans : mate we need your support as usual , you are the only person who has ISTA P V41 . shoot us a copy please .

[Jynkky]

Actually these (v41) files have been here long time, thanks for ap90500
http://cartechnology.co.uk/showthread.php?tid=10187