[mushimushi]

Hello,

I have been trying to follow the instructions in the original post to downgrade my CIC. I have set up the develop folders as instructed. I am doing the first module at the 63 address. The NAAB flashed correctly and my CIC is in boot loader mode. The program flash will not complete. I have tried many times, and used MOST_ASYNC_ab625 and MOST_ASYNC as i read somewhere that some people had more success with that. I have flashed the data ok however. I can reboot the CIC, and it will stay in boot loader mode, and is still contactable etc. It is not a total brick, the screen is blank and the fan is spinning. Anyone have any ideas? I have attached some error messages.

Wish I never started. I had the CIC, which I retrofitted into my E61 running perfectly, with combox and internet etc. I just wanted that little bit more and have apps, which I know aren't that great (I have them in an X1). I am using an ICOM unit.

This error is typical if you take wrong NAAB-File.
Check it out.

Anyway, the real V41 Datas of E60 (ECE) Adr.63 is not as ap90500 has posted.
But if you wana` have Apps in E60, Adr.63 has to be flashed with Files from E89, there is no way around it

I have the correct NAAB file. I know how to look up the correct one in the 0PA file. My CIC was flashed by the person i bought it from with the 9283418 firmware from an e89. I can see that data is going from the laptop to the icon, by monitoring the network.