[tohmc]

[THUMBS UP SIGN] great that i can help


Gesendet von iPhone mit Tapatalk Pro

[atomantmk]

After NAAB programming now don't work USB and Bluetooth, when i read car with ISTA it says that CIC is in blue programming canceled.
If i Flash latest SP Daten i think that USb and Bluetooth will be back because now i have SP Daten v41.

[atomantmk]

What about NAAB programming on F Models with CIC?

Sent from my HTC 10 using Tapatalk

[MaxBmw]

You will not do this in the Fxx series
This is only possible in the Exx series

[kostv09]

Hello guys, I have a bmw e60 retrofit cic 0909 and vo 6NR I do not accept it
HELP THANKS

[zonum]

Hi. I have performed the procedure in the order you explain. But when I select files, appears this error:
In first image appears error when i select file.
And when I give to prog. Program 63 (image 2 and 3) the winkfp stays in 64% and the following error appears:
Fourth image is when I try to recover it using update mode.

[zonum]

Anybody can help me?

[Pi26]

Anybody can help me?

Just walking there ...
I'm not a spec but you don't give exactly what is your HW config, including the car Platform, oem CiC or not.
Reread all the thread from the beginning.
First test your optical Icom as said before especially if this is a cloned one (using Tool32), see post #35.
Also your WinKfp Expert config.
Particular HW/car config/index are explained post #51
If there is no trouble, this is your data files : error 211 means a wrong naab file from the beginning flash you did, so verify using BM standard Tools.
Don't have much free time but if this can help a bit ...
PS: from BM coding I also see that you did it without any PSU, ... Crazy way man, particulary about the GW where it is mandatory.
Pic 2: this only shows the data loaded in your Laptop memory, and not a transfert one done to the CiC, so means no real communication.
PS2: my 2 cent Tip, tick Api.log in WinKfp config, try again and you will see exactly where the error happens looking at the Api error.log, Pic 4 is comfort mode but with the exactly same problem, ECU not responding, protocol error so erasing the old data isn't done and Flash session is aborted.
Reinstall the whole shit and test the package WITH a PSU !

[zonum]

Hello, thanks for all Pi26. Cic is not oem. What is PSU? thanks.

[Pi26]

Hello, thanks for all Pi26. Cic is not oem. What is PSU? thanks.

PSU = Power Supply Unit.
Building your own one for cheap, here:
DPS600PB Power Supply
For you the best way would be using ISTA/P then patching the CiC and generate your Fscs.
Despite tweaking Winkfp 5.31 according the api error (level 1) from a new install I went to the same error at the step erasing the data: access not allowed in expert mode (idem then using comfort mode) while the others SW run correctly, CiC is status 12 (or 0C in hex).
So build a PSU then use ISTA-P.