[Pi26]

Anybody can help me?

Just walking there ...
I'm not a spec but you don't give exactly what is your HW config, including the car Platform, oem CiC or not.
Reread all the thread from the beginning.
First test your optical Icom as said before especially if this is a cloned one (using Tool32), see post #35.
Also your WinKfp Expert config.
Particular HW/car config/index are explained post #51
If there is no trouble, this is your data files : error 211 means a wrong naab file from the beginning flash you did, so verify using BM standard Tools.
Don't have much free time but if this can help a bit ...
PS: from BM coding I also see that you did it without any PSU, ... Crazy way man, particulary about the GW where it is mandatory.
Pic 2: this only shows the data loaded in your Laptop memory, and not a transfert one done to the CiC, so means no real communication.
PS2: my 2 cent Tip, tick Api.log in WinKfp config, try again and you will see exactly where the error happens looking at the Api error.log, Pic 4 is comfort mode but with the exactly same problem, ECU not responding, protocol error so erasing the old data isn't done and Flash session is aborted.
Reinstall the whole shit and test the package WITH a PSU !