[Simple]

I have just recompiled DiagBox v7.83/8.19 successfully, but have no plans to post it now. I am hoping Maitresox will come back to the scene soon (after discovering someone is selling his work) and recompile it and post himself.

A list of the included corrections are in the snapshot attached.

Update 1, 18 Jan 2016:

It is regrettable that Maitresox will not post DBox v7.83 update; I appreciate his hurt.. But the main principle of forums is to exchange information and help others build experiences and possibly become "virtual" friends.

Let's stick to this one at least...

Hence, for the benefit of all, the Download link and Password for DiagBox update v7.83/8.19 (54MB) ISO, are in the attached "DiagBox_7.83_Readme.txt" file .. Remember, this update is applicable only if you already have DiagBox v7.82 installed.

Update 2, 20 Jan 2016:

I have also packaged the Engines (153mb) from DiagBox v8 into the file "DBox_Engns.exe". I thought I will do that to be more compatible with DiagBox v8, since we are using v8 updates, and i was concerned that they may issue updates which are incompatible with version 7. Link in the attached file.

If someone wishes to try it, be my guest, at your own risk (you can always stop the services delete the new folders and rename the original folders back). If the installer requests overwrite permissions, then you have forgotten to rename the original folders or you are doing it twice. It worked on my computer, but it was a quick one without much thought or testing.

The above engines are not needed if you wish to replace the full V8.19 APP folder (Post #24 in this thread), since they are already included. Installing APP V8.19 will NOT change the version number on your DiagBox installation, because it is coming from AWRoot which is not changed..

Please remember, this software is provided as is; for personal, educational and experimental use to upgrade from DiagBox version 7.82 to 7.83 only. I hold no responsibility for any illegal or improper usage. You install this software at your own risk.

Enjoy, Simple;

[hasan]

HI. Where can we download this update?

[yellowstilo]

Read his post again then you have your answer....

[Simple]

I have compiled two updates, one is from 7.76-783 (8.12-8.18) and one from 7.82-7.83 (8.18-8.19). But as I said, I do not wish to be imposing on anybody's turf nor hurt anybody's feelings.
So, please bear with me!

[Simple]

Hello all,
DiagBox v7.83 is attached in the 1st post, good luck..

Simple.

[manocao]

It is regrettable that Maitresox will not post DBox v7.83 update; I appreciate his hurt.. But the main principle of forums is to exchange information and help others build experiences and possibly become "virtual" friends.

Let's stick to this one at least...

great words simple! i really enjoy your posts
here you got a virtual friend

[zi3i]

Respect 100 % Professional

[Joe2]

Do we need wory about interface black list ? Is there any risk of china clones lock ?

[Simple]

No, I have not included the latest (4.3.4) firmware, and since you are updating from 7.82, Maitresox left it at 4.3.2!! I have heard about the rumor, but I was unable to substantiate it..

Having said that, I have flashed my device from 4.2.0 to 4.3.3 and 4.3.4 (9 in total) and I did not notice any problem nor did I notice any advantage !?!?

[mattydr67]

May you share fw 4.3.4 please
Thanks
Good luck