Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA+ 4.19.30 Update Problem
03-10-2019, 16:25 PM,
Post: #1
|
|||
|
|||
ISTA+ 4.19.30 Update Problem
Hi Guys!
I've a little problem with the latest version of ISTA+ (3.19.30). The diag part is working perfectly but after finished the diag got an error message "The Programming system could not be initialised. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems presist, contact local support" So the Software update function not working says "Please carry out the vehicle test first" I've installed 2 times from 2 different sources but everytime got the same error. Previous version 4.18.xx worked perfectly. After installation used the RCleaner4.4 and ISTA-D reg fix. Any idea guys how can I fix it? Thanks in advance!! |
|||
03-10-2019, 17:49 PM,
Post: #2
|
|||
|
|||
RE: ISTA+ 4.19.30 Update Problem
Do you need the programming mode of ISTA or do you need ISTA only for diagnostics?
|
|||
03-10-2019, 18:22 PM,
Post: #3
|
|||
|
|||
RE: ISTA+ 4.19.30 Update Problem
(03-10-2019, 17:49 PM)atzebmw Wrote: Do you need the programming mode of ISTA or do you need ISTA only for diagnostics? I need the Programming part of the ista, Diag part is working. I'd like to check the latest updates for my car, but not working, also tried with e-sys but something wrong with it since the 4.18.xx full data, cause the programming part not working just the coding. kis target I-STEP not available. |
|||
03-10-2019, 19:44 PM,
Post: #4
|
|||
|
|||
RE: ISTA+ 4.19.30 Update Problem
if you are using launcher console i can give the latest ispi admin licenses... and you can try and repair with native launcher
|
|||
03-10-2019, 19:50 PM,
Post: #5
|
|||
|
|||
RE: ISTA+ 4.19.30 Update Problem
|
|||
03-10-2019, 19:55 PM,
Post: #6
|
|||
|
|||
RE: ISTA+ 4.19.30 Update Problem
(03-10-2019, 19:44 PM)TeamActivator Wrote: if you are using launcher console i can give the latest ispi admin licenses... and you can try and repair with native launcher thanks, but I've no launcher console, I could fix my problem, there is a bug in the BLP 4.19.30. The folder which copy to PSdz. The "data". folder have to change data_swi and after that the ISTA+ recognize it. But my E-sys kis target I-STEP still not available. Do you have any idea whats wrong with it? using 3.27.1 version with ICOM. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content