Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Which power supply for programming
15-06-2016, 19:26 PM,
Post: #18
|
|||
|
|||
RE: Which power supply for programming
From my experience , the consumers at programming/coding when i use winkfp and istap , never operated at the same time. at some time the wipers will operate the lights and sunroof one buy one and istap always inform you prior of each operation for safety. when i program or update a car i shut off all consumers. I connect the power supply which at the begging may saw 7-8 amp draw. In 10 minutes till you prepare - load istap for E series it will be 3-4amp. the voltage should be adjusted for cars before 2007 14.5v max and for newer cars 14.8v max. I always adjust 14.4v. at an E series during a full programming and coding never exceeded 26 amp. At an F series never gone beyond 38amp again for full coding and programming. These are from my experience. Sorry no experience for 7 series.And just a reminder always first remove the negative and if connecting the negative should be connected last.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content