[BaggieMatt]

The car is totally behaving like a left hand drive. When u turn the ignition switch on the bing bong sound to put the drivers seat belt on goes off when u put the passanger side seat belt on. When u operate the drivers window or side mirror the passenger window and side mirror operates.

Does the cas software come LHD and RHD.
Or do I have to code using ncs.

Thank you.

There isn't as far as I am aware LHD or RHD specific software.

Go to bmwarchive. Here you will see different versions of your model with the relevant production codes such as NC31 and NC32 for left and right hand drive cars. This code will be in your VO/FA. Also it is characters 4-7 in your long VIN.

I think (happy to be corrected on this) that you just need to change it in NCSexpert. You might have to create a SSD file with the corrected value, load into NCSexpert and code car afterwards

[Ton1]

Will give that a try Monday and report back.

Thanks very much for clearing LHD/RHD software issue.

[____ANGEL___]

Uhm wait a minute! read uif from cas with winkfp... i'll provide you correct zb number for flash it with winkfp and solve the problem, remember to code it after flash with ncsexpert