[NEGOCAUTO33]

[/color]Hi family cartechnology

i need help for key TWINGO 2 MODEL + 2007

BIG PROBLEM remote on chinese key not work after program it

i know is problem for config remote and synch with hitag2 possible tell me good configuration for key PCF7946 2 BOUTON for remote control operate without problem only car start after program


thanks you very much

[djole3113]

Probably bad pcf preparation. You can solder new pcf,produce it with proper tool and programm key again.

[NEGOCAUTO33]

Probably bad pcf preparation. You can solder new pcf,produce it with proper tool and programm key again.

Hi yes 1000000000% sure bad configuration remote yes its for this post Méssage for member have Twingo 2 key Possible read AND post Picture with tag key tool OR ZEDBULL ....

Only Twingo 2 need change with hitag config AND synch for good remote .

I SEARCH this


THANKS

[NEGOCAUTO33]

Hi all ,

Who have solutions for remote TWINGO 2 (2 BUTTONS) work good ?

pls pls pls help me

i have lose lot of some key....

thanks for help

[NEGOCAUTO33]

Hi

Who have original remote work on TWINGO 2 ?
If Possible read configuration for remote (RCF / config )

I SEARCH solution

People lockmith have TANGO / TM100 / TAG KEY pls read key of Twingo 2 for put good configuration remote

THANKS THANKS THANKS IN ADVANCE....