[ovidiubuzzi]

Hello guys....i have a retrofited E60 CIC that had a CCC before....everything ok so far .When i wanted to install for the first time the intel 's patch didn t accepted old software inside the cic unit.I did an update with winkfp the all 3 modules 63,62,A0 using most conection and an Icom.After that the patch stick was accepted ,the unit rebooted i did inject the fsc everything ok the navi was working for about 5 minutes.After that turn off the engine and 15 minutes later the navy is still grayed but the fsc are ok.I did also an update to a 2018 version it went ok but navi stil unavailable and grayed.I will attach bellow a few photos.
When i read with inpa vin from cic it 0000 because when i flash the unit with winkfp i left the default vin....so i dodn t know if this could cause the proble.But i did wrote the vin with fstool ass you can see in the photo vin from cas is the same with cic

Any ideea will be apreciated

[Kri]

As your screenshot clearly shows your root certificate for European map is missing: SW_ID: 0028000A
You need to upload it also with FS Tool.

Kri

[ovidiubuzzi]

Thank you for ur answer but there is no template for 28 do you have any idea how to generate ?

[Kri]

afaik you don`t need a template, the root cert is the same for every SW_ID
it should be enough to connect FStool, set the parameters to the ID 28 and store the certs at "SWT Develop"

this is without any warrant, it`s already some time ago since i did this

if i`m wrong anyone can correct me ^^

Kri

[ovidiubuzzi]

afaik you don`t need a template, the root cert is the same for every SW_ID
it should be enough to connect FStool, set the parameters to the ID 28 and store the certs at "SWT Develop"

this is without any warrant, it`s already some time ago since i did this

if i`m wrong anyone can correct me ^^

Kri

Ok thank you i will try and post result

[sebastianfernandes]

The above statement for app id 28 is wrong. It has no certificate as it is the code for the map.
For the Navi being grey.. is it possible to check the root cert and sig cert? Post a screen shot.
Did you inject the sig cert?
The vin while programming does not matter as long as the vin in fsc is the same as the cas vin.

[ovidiubuzzi]

The above statement for app id 28 is wrong. It has no certificate as it is the code for the map.
For the Navi being grey.. is it possible to check the root cert and sig cert? Post a screen shot.
Did you inject the sig cert?
The vin while programming does not matter as long as the vin in fsc is the same as the cas vin.

Hi....how can i check the root certificates ?what i did load every templates  change in each one the numbers 1B,19....sign the and save them.As for 28 the map one there was no templates didn t know how to sign root or other thing.can you gine an advice o how to do that?thank you

[Fx82]

Send tv access to me. I will fix it for you.

[ovidiubuzzi]

The above statement for app id 28 is wrong. It has no certificate as it is the code for the map.
For the Navi being grey.. is it possible to check the root cert and sig cert? Post a screen shot.
Did you inject the sig cert?
The vin while programming does not matter as long as the vin in fsc is the same as the cas vin.

So i went to the car and read it 3 times with  cic utily the first attemt show fsc the other 2 show emulator but i don have a emulator.maybe there was ine from before.i have to mention that the version is c09 not c1A it was flashed with winkfp but i never used ftp or telnet to delete files from the before activation.the cic restarted with a red screen after usb inserted.thank you

---

Send tv access to me. I will fix it for you.

Tomorrow let me know when you are available i will send you tv.thank you

[ovidiubuzzi]

Ok....So i did solve the problem with the navigation still gray.The fault was when i was signing in the certificates i was clicking sign in and save as but at the end i wasn't clicking apply.The rest  is everything as it was before.The sw_28 still half red half red navi is working perfect for about 3 hours.I will update to 2019 maps later and see result.Thank you for the answer