Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500
17-03-2017, 14:52 PM,
Post: #11
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
(12-03-2017, 11:03 AM)georgia55 Wrote: I have tried today an F 01 with ISTA-D to program (with full PsdZdaten), but unfortunately comes error: vehicle please identify first, although I have vehicle read out and error cleared. Hi, I also cannot program F series. Getting message "Please perform vehicle test first" Any solution for this? |
|||
19-03-2017, 04:05 AM,
Post: #12
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
Hello, you can not download the link ISTA / P 3.6
|
|||
19-03-2017, 07:11 AM,
Post: #13
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
(17-03-2017, 14:52 PM)Thinkpad Wrote:(12-03-2017, 11:03 AM)georgia55 Wrote: I have tried today an F 01 with ISTA-D to program (with full PsdZdaten), but unfortunately comes error: vehicle please identify first, although I have vehicle read out and error cleared. You NEED to use ICOM to be able to program through ISTA Please, Press the Buttons and if you feel that this post helped you!
|
|||
19-03-2017, 08:12 AM,
Post: #14
|
|||
|
|||
Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
(19-03-2017, 07:11 AM)Loliceman Wrote:(17-03-2017, 14:52 PM)Thinkpad Wrote:(12-03-2017, 11:03 AM)georgia55 Wrote: I have tried today an F 01 with ISTA-D to program (with full PsdZdaten), but unfortunately comes error: vehicle please identify first, although I have vehicle read out and error cleared. I am using ICOM clone with latest firmware |
|||
19-03-2017, 09:32 AM,
Post: #15
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
Hi,
I have troubles with connecting with F series with ISTA/P via ICOM. ISTA+, ISTA D, NCS expert, Winkfp works without problems. After retrieving VIN and model designation, ISTA P throws CASTOR error 63014. I updated ICOM with new firmware, checked all settings but cannot get connection. I also tried with another computer with older ISTA P version but same problem. Here I post my setup, if anyone has a clue what might be wrong.. I can flash E series without problems with mine ICOM, flashed a lot of cars in past. I think there must be some problem with connecting to car "Ethernet" port. I also turned off firewall on PC, removed car battery, done Flex ray initialization with ISTA+, so I am out of ideas. I want to program this car to code used EPS module. |
|||
24-03-2017, 09:29 AM,
Post: #16
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
(12-03-2017, 14:49 PM)Blackline Wrote: Will you be uploading a new package with ISTA 4.04.20 and ISTA/P 3.61.1? No. Only when ISTA 4.05 will be releasd. |
|||
24-03-2017, 14:48 PM,
Post: #17
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
Thanks spider80 for sharing this upload. Is anyone there by any chance having Greek language for this ista_d version?
|
|||
29-03-2017, 11:54 AM,
Post: #18
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
Hello everybody !
Can you explain me what is FASTA & HW check ? Thanks ! |
|||
03-04-2017, 14:33 PM,
Post: #19
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
Faq is password protected
|
|||
03-04-2017, 16:12 PM,
Post: #20
|
|||
|
|||
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent
(19-03-2017, 09:32 AM)Thinkpad Wrote: Hi,bad copy ıcom..not soetware problem.. change and use orıgınal and best cıopy ıcom .. ıf u want f serıes programıng and readıng fault code.. not thats problem 2012 after best regards by kenwood |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content