[hipolitogt]

Well, with the help of an user we managed to load naab file (was getting errors) and now fails at program, so tomorrow will try, but it should be sw problem...


Enviado desde mi iPhone utilizando Tapatalk

[intel123]

I asked politley now please stop with discussion about your cic as this thrad is not about faulty devices.

[hipolitogt]

I asked politley now please stop with discussion about your cic as this thrad is not about faulty devices.

Sorry for disturbing...

[hojo29]

I can also try to flashen CIC.
If then they send me PM

http://cartechnology.co.uk/showthread.ph...683&page=2

[hipolitogt]

Problem solved... now it's time to activate... I can't connect with fstool... maybe I need Ethernet connection or I can use icom/diagbus connection?


Enviado desde mi iPhone utilizando Tapatalk

[jackylooo]

I think it has something with the certificate, if you look at the error it states "Error building X509 certificate of byte array" so i really couldnt know what is wrong as this is out of patch scope but try everything again following instructions or try reinstalling or re-downloading esys with lite data.

I forgot to mention, my CIC was euro version and trying to activate for Taiwan map, I did passed the first step, CIC rebooted within 10seconds and all FSC cleared.
However, I failed to load new signed FSC with esys 3.28.1 and it had the X509 error as I posted previously.
Was that because I changed the country to TW?
Or it's simply an esys issue? Too new to support CIC?

[ClockW]

Intel123 and other contributors to the thread, thankyou for your hard work and guidance. However, I need your help.

I have a factory fit CIC and successfully flashed it using the USB stick to virginise the CIC. Using Diagnose Address 63, I can use SWT Develop to Store_Sig_cert, Store_FSCS_cert and Store_FSC, then Check_Sig_cert, Check_FSCS_cert and Check_FSC for 17, 19 and 9C. I used a K-DCAN Cable.

All FCS Templates were updated with my VIN with no errors.

The problem is that I cannot do this with 1B. Store gives error code [2090] and Check gives the error code [2020].

How do I Store and Check 1B? Without it my Navigation will not work

Thankyou. CW

[sebastianfernandes]

Intel123 and other contributors to the thread, thankyou for your hard work and guidance. However, I need your help.

I have a factory fit CIC and successfully flashed it using the USB stick to virginise the CIC. Using Diagnose Address 63, I can use SWT Develop to Store_Sig_cert, Store_FSCS_cert and Store_FSC, then Get_Sig_cert, Get_FSCS_cert and Get_FSC for 17, 19 and 9C. I used a K-DCAN Cable.

All FCS Templates were updated with my VIN with no errors.

The problem is that I cannot do this with 1B. Store gives error code [2090] and Get gives the error code [2020].

How do I Store and Get 1B? Without it my Navigation will not work

Thankyou. CW

Check Your PM!!!!

[danyro]

Sebastian - pls can you write the fix here as for sure can help others too - me too also

thx and cheers!

[intel123]

Sebastian - pls can you write the fix here as for sure can help others too - me too also

thx and cheers!

Read thru thread it is written multiple times im sure that you did as you just suggested to other you wouldnt be asking the question in the first place.