[Silva1337]

Im tryed to use dcan and enet, also i got icom but didnt used

[kristikapa]

Dcan should work. In e series you don't have support for enet interface. Try to work with Dr gini latest version and post a screenshot of your certificate status

Sent from my ONEPLUS A3003 using Tapatalk

[Silva1337]

When im using get_status on fstools on 17,19,1b i see that everthying accepted but fsc code for nav is still incorect, loader im using is working cause im used it on genuine NBT

second photo is after importing 17,19,1b fsc which was edited by fstool (also did sign in and check using fstools)
seems that they restore of couple of time like in 1st photo
can somebody give me a hand through teamviewer?

[Gini]

1. Import FSCS Certificate
2. Check FSCS Certificate
Once all FSCS certificates are ACCEPTED

3. Import FSC
4. Check FSC

[driver543]

Hello,

I patched my Navi (BMW f10 2012 CIC) with the USB Stick and after that my Computer crashed.
Now my navi isnt working anymore (light Grey font).

He is also writting: "A few Navigation functions are currently unavailaible"

Following Problems:

- no Connection with Esys
- tried to install original 2016 maps with original 2016 key again, now is writting that my "original key" is wrong.

What should i do now? Has anyone an idea?

BR

[kristikapa]

Was it working before? Why you used the USB patcher if navigation was not greyed out?

Now you will have to load certificates and modified fsc for your car using esys.

Sent from my ONEPLUS A3003 using Tapatalk

[driver543]

Was it working before? Why you used the USB patcher if navigation was not greyed out?

Now you will have to load certificates and modified fsc for your car using esys.

Sent from my ONEPLUS A3003 using Tapatalk

Yes it was working before, but i was following the instructions as discribed at the first post and the attached Manual.

i tried it as described at the Manual "SWT-Patcher – A guide how-to", but it does not work.

for example: if i click on Check FSC Status, it does not fill out the Parameters like diagnistic address or Base Variant.
Should i put in those values manually?

[kristikapa]

Yes. You should input manually. Address 0x63, app id : 17, 19 etc

Sent from my ONEPLUS A3003 using Tapatalk

[Fx82]

When creating the certificates for E series does it matter if you create them with e-sys?
I don't think so but just to be sure.

[SweetBMW]

Should not matter