Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
COAPI-7444 error when updating CCC-BO (E60) with ICOM A+B
20-05-2017, 12:19 PM,
(This post was last modified: 20-05-2017, 12:25 PM by inotherwords.)
Post: #1
|
|||
|
|||
COAPI-7444 error when updating CCC-BO (E60) with ICOM A+B
Hi!
The car is a 2004 E60 with CCC-BO stuck in programming state = 7 (programming active) after failed update with ISTA/P and K+DCAN by the previous owner. All others ECUs in CCC are available and work. I can read UIF from HOST, but ident looks odd with part number like ****** and coding index is FF. I tried to update HOST (63 addr) with the same ZBNR (9185622) from latest UIF using ICOM A1 + B connected to MOST and different modes like most_async and most_async_ab625, port 6801 and 6802, with/without bootloader update, but every time it fails with COAPI-7444 error at 2 or 6%: [<winkfp Tool] 7444 PABD/CABD 137DLEXXL FlashDLE 2595 [<winkfp Tool] OPPS-DLE: ECU block programming no frame STEUERN_DLE_LADEN (DLE_STATUS): MISMATCH [<winkfp Tool] 7444 Error COAPI2.CPP coapiRunCabd 6 [<winkfp Tool] OPPS-DLE: ECU block programming no frame SG_PROGRAMMIEREN [<winkfp Tool] 7444 Error COAPIKF.CPP coapiKfProgSgD2 19 [<winkfp Tool] OPPS-DLE: ECU block programming no frame I couldn't find any information about 7444 error, but found only one thread on the .pl forum with the same error without any answer. I managed to restore functionality of CCC using set_end_swl job in Tool32, but CCC-BO remains in active programming state. Any ideas? I'll try to use ISTA/P next week, but need to find a voltage control tweaker first. |
|||
20-05-2017, 12:54 PM,
Post: #2
|
|||
|
|||
RE: COAPI-7444 error when updating CCC-BO (E60) with ICOM A+B
Are you trying in car?
MOST loop closed? |
|||
20-05-2017, 13:00 PM,
Post: #3
|
|||
|
|||
RE: COAPI-7444 error when updating CCC-BO (E60) with ICOM A+B
|
|||
02-07-2022, 18:48 PM,
Post: #4
|
|||
|
|||
RE: COAPI-7444 error when updating CCC-BO (E60) with ICOM A+B
(20-05-2017, 13:00 PM)inotherwords Wrote:(20-05-2017, 12:54 PM)simaservis1108 Wrote: Are you trying in car? Hello, did you fix it ? I'm in the same boat after a failed flash with ISTA-P |
|||
03-07-2022, 17:10 PM,
Post: #5
|
|||
|
|||
RE: COAPI-7444 error when updating CCC-BO (E60) with ICOM A+B
try winkpf procedure
1 -CC6260 <-- Bridge/gateway obd_625 2 -CC3F60 <-- Audio bridge_async 3 -CC4760 <-- tune most_async 4-CC6360 <-- Guest bridge async 5 -CCA060 <--Application bridge asyn_ab_625 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content