Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ F25 - Remove TPMS Warning
13-06-2017, 17:33 PM,
(This post was last modified: 20-06-2017, 10:26 AM by Clusters.)
Post: #1
|
|||
|
|||
F25 - Remove TPMS Warning
Hi,
Has anyone succesfully coded the TMPS warning off on F25? I tried removing 2vb from VO, but that didn't do it. Do I need to FDL code some values? I checked Kombi and the ST_TYR_RDC_TIMEOUT and ST_TYR_RDC_ALIVE are now set to nicht_aktiv. So I would assume the new VO was coded successfully. HU: KOMBI: RDC: |
|||
13-06-2017, 17:35 PM,
Post: #2
|
|||
|
|||
RE: F25 - Remove TPMS Warning
Have you coded ICM and DSC? I think they are related to TPMS, aren't they?
Sent from my SM-N9005 using Tapatalk All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
13-06-2017, 17:44 PM,
Post: #3
|
|||
|
|||
RE: F25 - Remove TPMS Warning
Hi,
1) removing 2vb from VO + coding 2) removing module RDC or fuse |
|||
13-06-2017, 18:23 PM,
Post: #4
|
|||
|
|||
RE: F25 - Remove TPMS Warning
(13-06-2017, 17:35 PM)Mwahab Wrote: Have you coded ICM and DSC? I think they are related to TPMS, aren't they? Yep, I coded both ICM and DSC (13-06-2017, 17:44 PM)MaxBmw Wrote: Hi, I removed 2vb and coded DSC, HU, KOMBI and RDC. I didn't pull fuse, because someone said that the same fuse is used for DMTL. |
|||
13-06-2017, 18:50 PM,
(This post was last modified: 13-06-2017, 18:52 PM by MaxBmw.)
Post: #5
|
|||
|
|||
RE: F25 - Remove TPMS Warning
Removing module RDC - USA
Removing module RDC or fuse - Europe |
|||
13-06-2017, 21:03 PM,
Post: #6
|
|||
|
|||
RE: F25 - Remove TPMS Warning
Have disabled it. You need to delete 2VB, and physically disconnect RDC module (right sight in the trunk). Nor coding, nor VO coding will help without disconnection. Spent all day playing with it.
|
|||
13-06-2017, 21:10 PM,
Post: #7
|
|||
|
|||
RE: F25 - Remove TPMS Warning
I've already explained
|
|||
13-06-2017, 21:28 PM,
(This post was last modified: 13-06-2017, 21:30 PM by Spirit5676.)
Post: #8
|
|||
|
|||
RE: F25 - Remove TPMS Warning
So disconnecting module RDC after coding will take care of the KOMBI and HU warnings? It's EUR car, but disconnecting the fuse ain't an option because that fuse provides power to DMTL (I checked the wiring diagrams on ISTA+). So disconnecting the module seems to be the way to go.
|
|||
13-06-2017, 21:45 PM,
Post: #9
|
|||
|
|||
RE: F25 - Remove TPMS Warning
DSC, Kombi ,HU
Will change RDC to RPA sorry for my english |
|||
13-06-2017, 22:23 PM,
Post: #10
|
|||
|
|||
RE: F25 - Remove TPMS Warning
I already coded DSC, KOMBI and HU after removing 2VB from VO. I still got the TPMS errors in KOMBI and HU. So unplugging the RDP module will make the TPMS warnings disappear in KOMBI and HU? No need to be sorry about your english.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content