Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Jungheinrich Eks 314 code 228
15-02-2014, 22:35 PM,
Post: #1
|
|||
|
|||
Jungheinrich Eks 314 code 228
Hello,
I have a jungheinrich eks 314 ac orderpicker. On initial start up self check the steering contact does not pull in and gives a code 228. Lift has no functions, drive or hydraulics. Any help with definition of this code please. |
|||
16-02-2014, 12:05 PM,
Post: #2
|
|||
|
|||
RE: Jungheinrich Eks 314 code 228
(15-02-2014, 22:35 PM)Ernied Wrote: Hello, Hi i work on wagner vna trucks in the UK. You will need to clear the error in steering first, unfortunately atm i dont know what code 228 refers to. however this could could be due to the emergency start up chain not complete or an error in steering, ie main module not getting steering OK signal. Hope this helps |
|||
16-02-2014, 14:46 PM,
Post: #3
|
|||
|
|||
RE: Jungheinrich Eks 314 code 228
Yes checked all possibilities without knowing the code. Steer angle sensor on steer motor changes the direction on dash display when turned manually. Checked ohms on harness wires from operator panel to junction box on rear panel, all wires good. Think problem is in steer wheel sensor but not positive, do not like to just change parts.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
CUMMINS SELECT X28C64M 111 FAULT CODE | shanektm450 | 0 | 484 |
24-01-2022, 05:17 AM Last Post: shanektm450 |
|
MB Atego 818 error code GS0173 ? | ihka | 2 | 1,303 |
27-03-2017, 17:40 PM Last Post: ihka |
|
I need error list Jungheinrich EKX 515 | grzesiek2304 | 0 | 1,241 |
05-03-2017, 20:00 PM Last Post: grzesiek2304 |
|
Jungheinrich ETV 114 problem"lenkung fehlt" | bpazanin | 0 | 1,703 |
24-01-2014, 17:40 PM Last Post: bpazanin |
|
Scania trouble code list | tumppulo | 1 | 4,328 |
18-01-2014, 21:28 PM Last Post: sisco |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content