Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[E60] Different amount of ECUs in ident/uif table
11-07-2017, 12:32 PM,
Post: #1
|
|||
|
|||
[E60] Different amount of ECUs in ident/uif table
Hi guys!
I'm trying to solve strange problem with E60 (pre LCI with KGM and start/stop button, K-Line of course). INPA sees different amount of ECU's in the ident/uif table every time as I press F2 and F3. Sometimes SINE ecu shows "invalid format" error and 30+ modules, sometimes only 10-20 of them. What's the problem? Do I need to replace KGM on this car? ISTA/P is asking me to do that. BTW there are no problems with that car, ISTA/D is working fine, only INPA and ISTA/P have these issues. I'm using genuine ICOM and have no problems with my D-CAN car. |
|||
27-07-2017, 23:09 PM,
Post: #2
|
|||
|
|||
RE: [E60] Different amount of ECUs in ident/uif table
Any ideas? I assume that my ICOM has problems with K-Line, but I'm not sure. I'll try to use K+D-CAN adapter to check if it works well or not...
|
|||
30-07-2017, 09:45 AM,
(This post was last modified: 02-08-2017, 13:45 PM by inotherwords.)
Post: #3
|
|||
|
|||
RE: [E60] Different amount of ECUs in ident/uif table
Well, it wasn't my ICOM, the car has problems with CAN wiring somewhere. My K+D-CAN adapter works with similar problems.
UPD: MOST-GW disappears sometimes from the list with all MOST ECU's. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content