Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom A2 clone D-Can problem
15-08-2017, 13:37 PM,
(This post was last modified: 15-08-2017, 14:41 PM by jararak.)
Post: #1
|
|||
|
|||
Icom A2 clone D-Can problem
I have icom a2 clone very long time (over 4 years), curently I spot very strange problem. I'm able to connect everything old - e30, e34/6, e46 and also prefacelift e60/90 - everything which not required DCAN. Also Fmodels works like a charm, but If I need connect something with DCAN like 2009 e60 or 2010 e90, also 2011 E70 - IstaD shows me no identification car possible.
Is it possible some part/chip are broken? I try to update/downgrade firmware but without luck. |
|||
15-08-2017, 20:16 PM,
Post: #2
|
|||
|
|||
RE: Icom A2 clone D-Can problem
ICOM clone
Remove and check PCB connections with OBD connector Then check the Transceiver CAN (8pin) - voltage |
|||
05-10-2017, 19:45 PM,
Post: #3
|
|||
|
|||
RE: Icom A2 clone D-Can problem
Hello,
I have the same problem with my Icom A2. Voltage is steady at Pin 2-3 -> 3Volts Resistance trough Icom to OBD at the Can-Pins is 39k. Is this normal or is the IC damaged? For me it looks normal but i‘m not really sure Do you solved your problem? Hopefully someone can help me Regards |
|||
09-03-2018, 10:38 AM,
Post: #4
|
|||
|
|||
RE: Icom A2 clone D-Can problem
Solved it by swapping the Can-Chip on the pcb. It is an 8 pin Chip near to the red connectors.
Price is arround 3$ so try it After it everything worked fine. |
|||
09-03-2018, 11:55 AM,
Post: #5
|
|||
|
|||
RE: Icom A2 clone D-Can problem
Do you have the number or pic?
many thanks |
|||
09-03-2018, 20:13 PM,
(This post was last modified: 10-03-2018, 12:03 PM by Julianino.)
Post: #6
|
|||
|
|||
RE: Icom A2 clone D-Can problem
Here the picture with the 8 pin chip.
Just swap it to a new one if D-Can Communication fails. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 107 | 36,411 |
29-04-2024, 16:33 PM Last Post: hashtagmaster |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,469 |
26-04-2024, 08:06 AM Last Post: smilo |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,778 |
22-04-2024, 11:44 AM Last Post: kwat |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 43,494 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 338 |
12-04-2024, 18:55 PM Last Post: Node |
|
BMW E60 coding problem | GarageX | 8 | 362 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,506 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 383 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 167 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 275 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content