[Bimmer540]

I have never used K+DCan cable, with ISTA I'm using only ICOM.

Gesendet von meinem HTC 10 mit Tapatalk

Sorry, but I need ISTAGUI.exe.config Can you post it.

[jogi8850]

Dear snypertje,
yesterday a read out a e60 with K+DCan.
No Problems! but the ABL-GES needs a little bit time!
in my case i think it,s a problem with my slow laptop
Regards

[atomantmk]

I think that in your file is missing 3 or 4 lines.

Code:

<!-- Enable Programming -->
<add key="BMW.Rheingold.Programming.ExpertMode" value="true" />
<add key="BMW.Rheingold.Programming.Enabled" value="true" />
<add key="BMW.Rheingold.Programming.PsdzDataPath" value="..\..\..\PSdZ\data_swi"/>

[Bimmer540]

Dear snypertje,
yesterday a read out a e60 with K+DCan.
No Problems! but the ABL-GES needs a little bit time!
in my case i think it,s a problem with my slow laptop
Regards

No it's not your laptop but a new funtion in Ista like FASTA.

If someone can fix this like FASTA it would be great.

[DNK76]

Your problem can be solved differently
with K-dcan
To the E series for K-dcan you can have next,
older versions of ISTA RHEINGOLD
all versions from
3.40 to 3.44 work on a newer license,
works from any location
even from an external USB drive or USB stick
no need to edit the registry,
or use the R-cleaner
You can have the latest version 4.08
fully operational with ICOM
You can run it in a moment
Versions 3.44 for old models
We close the old versions 3.44
and we can go to the newer 4.08,
Only edit the VCI interface settings
in the newer version 4.08
Of course, versions 3.44 can be unpacked without installation
Any place

[Bimmer540]

That's not the problem. Problem is a new function in Ista!!

[kmbeatz]

@DNK76

Thank you so much. Your Idea is Brilliant.

I have now installed a old Rheingold Version along with new Ista+

Both Working Perfect alongside.

Thank you