Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F30 2TB option
09-12-2017, 21:31 PM,
Post: #1
|
|||
|
|||
BMW F30 2TB option
Hi everyone,
I was looking at Tokenmasters NCD-CAFD program and I wanted to see what you needed to code for having the 2TB in optimal working progres. I have seen that the among the KOMBI, EGS and ICM also the DSC and IHKA + FEM had to be coded. Now the strange part; In the IHKA ecu the following had to be coded: KOMPRESSOR_KUPPLUNG no NICHT_AKTIV while this is on AKTIV. In the FEM_BODY ecu the following one had my attention: AIC_KOMPRESSOR_MAG_KUPPLUNG = nicht_aktiv [Default] while this is aktiv. Any idea if it's safe to do change this? I drive a F30 316d 2014. |
|||
09-12-2017, 21:37 PM,
Post: #2
|
|||
|
|||
RE: BMW F30 2TB option
(09-12-2017, 21:31 PM)Ibrahim24 Wrote: Hi everyone, It is just a guide as it does not know existing values. Better to use Coding-Verification and NCD compare. |
|||
09-12-2017, 21:41 PM,
(This post was last modified: 09-12-2017, 21:56 PM by Ibrahim24.)
Post: #3
|
|||
|
|||
RE: BMW F30 2TB option
I have searched for those value's and they are present.
That's why I asked, would that be "bad" to change the value since it has to do with the KOMPRESSOR_KUPLUNG. As suggested Almaretto: I tried the Coding-Verification and it did not gave any problems. So it will be safe to deactivate the Kompressor_kuplung in the IHKA and FEM ecu? |
|||
09-12-2017, 22:59 PM,
Post: #4
|
|||
|
|||
RE: BMW F30 2TB option
(09-12-2017, 21:41 PM)Ibrahim24 Wrote: I have searched for those value's and they are present. I would recommend checking Xpath to understand why it suggests those values. |
|||
13-12-2017, 08:23 AM,
(This post was last modified: 13-12-2017, 08:27 AM by bmwdd.)
Post: #5
|
|||
|
|||
RE: BMW F30 2TB option
(09-12-2017, 22:59 PM)Almaretto Wrote:(09-12-2017, 21:41 PM)Ibrahim24 Wrote: I have searched for those value's and they are present. can you advise how Xpath value is interpreted? |
|||
13-12-2017, 12:19 PM,
Post: #6
|
|||
|
|||
RE: BMW F30 2TB option
I have a question regarding 2TB. I retrofitted shift paddles with 2TB.
Before: Driving in comfort mode and switching transmission into manual/sport (to the left) swiched sport driving mode ON. After pushing transmission stick back to drive, driving mode switched back to comfort. After: This does not work anymore. Need to manually switch driving modes. How to fix this? |
|||
13-12-2017, 16:03 PM,
Post: #7
|
|||
|
|||
RE: BMW F30 2TB option
(13-12-2017, 08:23 AM)bmwdd Wrote: can you advise how Xpath value is interpreted? http://www.bimmerfest.com/forums/showthr...p?t=678682 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content