Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XENTRY XDOS & PassThru how to install for dummies
14-12-2018, 02:54 AM,
Post: #471
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(14-12-2018, 01:19 AM)wakawaka Wrote:(13-12-2018, 21:45 PM)aholmes28191 Wrote: can someone help me? i have installed xentry passthru as described, and it works good, but i am trying to connect to a w220 2000 s class, so xentry changes over to DAS. the tool i am using is a VCX nano 5054 for VW. the tool connects to the car reads the VIN and voltage, when i try to access a module i keep getting. I will check for latest firmware on device, i am nearly sure is is up to date. and vxmanager is installed. i am unsure how to update the driver, can you advise of the process? Im not sure if this makes a difference but i run xentry though a VM running win7. on this machine i also have VW ODIS and JLR SDD, ODIS works 100% and SDD untested. i cant use a cable as the middle of the USB is missing and the seller is AWOL(long story) but can successful access it via ip and and a mobile hotspot, i am currently trying to find someone local who can carry out the repair to the USB. but essentially should the VCX nano support this application? silly question but when you launch xentry do you use the VXDIAG J2534 driver? thanks for your help, it seems there is not a hell of a lot of information about VCX nano to reference |
|||
14-12-2018, 03:25 AM,
Post: #472
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
[/quote]
I will check for latest firmware on device, i am nearly sure is is up to date. and vxmanager is installed. i am unsure how to update the driver, can you advise of the process? Im not sure if this makes a difference but i run xentry though a VM running win7. on this machine i also have VW ODIS and JLR SDD, ODIS works 100% and SDD untested. i cant use a cable as the middle of the USB is missing and the seller is AWOL(long story) but can successful access it via ip and and a mobile hotspot, i am currently trying to find someone local who can carry out the repair to the USB. but essentially should the VCX nano support this application? silly question but when you launch xentry do you use the VXDIAG J2534 driver? thanks for your help, it seems there is not a hell of a lot of information about VCX nano to reference [/quote] there is zero detail info on VCX Nano & they never reply or respond to you. I will pm you link for latest driver # VCX Passthru Driver Update History ================================================================================ ## 2018.09.26 v04.04.180926 ------------------------------------------ * Fix XXX_PS protocol communication with Pin6/Pin14(SGM RDS). ------------------------------------------ ================================================================================ ## 2018.08.24 v04.04.180824 ------------------------------------------ * Fix PassthruConnect reinitialize period message count (GM SWCAN Programming J2534_ERR_EXCEED_LIMIT). ------------------------------------------ ================================================================================ ## 2017.11.01 v04.04.171101 * Fix K-LIne UART configuration(BIT,PARITY). * Add TP20 protocol. * Add UART_ECHO_BYTE_PS protocol. * Fix ISO15765 CAN pad byte error. * Fix some other error. ================================================================================ ## 2017.06.20 v04.04.170620 1. Fix passthru lic for DASR2. ================================================================================ ## 2017.03.22 v04.04.170322 1. Fix crash when call readmsg after disconnect(Benz). 2. Add UART parity and data_bits config for ISO9141/14230. ================================================================================ |
|||
14-12-2018, 06:51 AM,
Post: #473
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(13-12-2018, 13:47 PM)pesona Wrote: probably it is a hardware (sdconnect) failure mate.I will try with W204 in DAS as soon as I have the opportunity, thanks!! |
|||
14-12-2018, 15:03 PM,
Post: #474
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I will check for latest firmware on device, i am nearly sure is is up to date. and vxmanager is installed. i am unsure how to update the driver, can you advise of the process? Im not sure if this makes a difference but i run xentry though a VM running win7. on this machine i also have VW ODIS and JLR SDD, ODIS works 100% and SDD untested. i cant use a cable as the middle of the USB is missing and the seller is AWOL(long story) but can successful access it via ip and and a mobile hotspot, i am currently trying to find someone local who can carry out the repair to the USB. but essentially should the VCX nano support this application? silly question but when you launch xentry do you use the VXDIAG J2534 driver? thanks for your help, it seems there is not a hell of a lot of information about VCX nano to reference [/quote] there is zero detail info on VCX Nano & they never reply or respond to you. I will pm you link for latest driver # VCX Passthru Driver Update History ================================================================================ ## 2018.09.26 v04.04.180926 ------------------------------------------ * Fix XXX_PS protocol communication with Pin6/Pin14(SGM RDS). ------------------------------------------ ================================================================================ ## 2018.08.24 v04.04.180824 ------------------------------------------ * Fix PassthruConnect reinitialize period message count (GM SWCAN Programming J2534_ERR_EXCEED_LIMIT). ------------------------------------------ ================================================================================ ## 2017.11.01 v04.04.171101 * Fix K-LIne UART configuration(BIT,PARITY). * Add TP20 protocol. * Add UART_ECHO_BYTE_PS protocol. * Fix ISO15765 CAN pad byte error. * Fix some other error. ================================================================================ ## 2017.06.20 v04.04.170620 1. Fix passthru lic for DASR2. ================================================================================ ## 2017.03.22 v04.04.170322 1. Fix crash when call readmsg after disconnect(Benz). 2. Add UART parity and data_bits config for ISO9141/14230. ================================================================================ [/quote] thanks for the driver update wakawaka, my current driver was a version behind, and i downloaded the lastest firmware which was also 1 version behind as the new version was 30/11/2018, upon loading the firmware update the process failed and has since stopped communicating with vxmanager, seems to be bricked possibly, as previously stated the usb connection is no good to use, so im at the end of the road with this tool for now until it is repaired. i have ordered another cable as i want to try something with a cable not wireless to rule that out, it is a "V154 JLR Mongoose SDD Pro For Jaguar and For Land Rover" i know it states mongoose pro is compatible with xentry pass thru so should this one do the job? if so as these cables are j2534 pass thru, should they work with other software if the driver is correct for the software? i.e. could i use this with fords IDS, or toyota techstream, GM tech2 |
|||
15-12-2018, 00:50 AM,
Post: #475
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(14-12-2018, 15:03 PM)aholmes28191 Wrote:(14-12-2018, 03:25 AM)wakawaka Wrote: thanks for the driver update wakawaka, my current driver was a version behind, and i downloaded the lastest firmware which was also 1 version behind as the new version was 30/11/2018, upon loading the firmware update the process failed and has since stopped communicating with vxmanager, seems to be bricked possibly, as previously stated the usb connection is no good to use, so im at the end of the road with this tool for now until it is repaired. i have ordered another cable as i want to try something with a cable not wireless to rule that out, it is a "V154 JLR Mongoose SDD Pro For Jaguar and For Land Rover" i know it states mongoose pro is compatible with xentry pass thru so should this one do the job? if so as these cables are j2534 pass thru, should they work with other software if the driver is correct for the software? i.e. could i use this with fords IDS, or toyota techstream, GM tech2 [/quote] the tool support j2534 pass thru so it would/should work with other software that support j2534 fully. however I do not think it will work with ford & mazda IDS as it support VCM hardware only and not pass thru (you could try..). Techstream & GM tech2 I never use before. However if you want to do Ford/Mazda the tool should work with j2534 in FORSCAN software (free for windows) and can do lots of stuff for Ford/Mazda. Advanced function require license - but register in FORSCAN forum and you can generate license for free too! Here is link show how to use VCX j2534 passthru--->> VCX FORSCAN |
|||
Reputation: +1 - pesona [+1] | |||
15-12-2018, 15:32 PM,
Post: #476
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
What's new
Dec 15, 2018:
|
|||
15-12-2018, 23:36 PM,
Post: #477
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(15-12-2018, 00:50 AM)wakawaka Wrote:(14-12-2018, 15:03 PM)aholmes28191 Wrote:(14-12-2018, 03:25 AM)wakawaka Wrote: the tool support j2534 pass thru so it would/should work with other software that support j2534 fully. however I do not think it will work with ford & mazda IDS as it support VCM hardware only and not pass thru (you could try..). Techstream & GM tech2 I never use before. However if you want to do Ford/Mazda the tool should work with j2534 in FORSCAN software (free for windows) and can do lots of stuff for Ford/Mazda. Advanced function require license - but register in FORSCAN forum and you can generate license for free too! Here is link show how to use VCX j2534 passthru--->> VCX FORSCAN [/quote] I will definitely have a go at using the mongoose cable with these programs when it arrives, mainly though I would like it to work with xentry and DAS so fingers crossed. The ford IDS thing confuses me a little, but maybe I'm overthinking this, so I previously worked at a JLR dealer that used mongoose cables for SDD but if the car was a jaguar before say 2005 then the legacy program it used was IDS (which makes sense as ford owned jaguar and land rover around this time), so surely ford IDS would be a similar setup (Maybe a question for the JLR section I suppose) . I do use the vcx for forscan and it doesn't read DTC but I use a modded ELM327 cable that works a dream. My main task at the minute is using Xentry passthru, I don't work on enough Mercedes to justify paying for a full SD multiplexer, so I'm trying a few ways to see if I can get around this. Thanks for the help so far very much appreciated |
|||
16-12-2018, 19:15 PM,
Post: #478
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I think I installed all patches correctly, but on x86 Win 7 I keep getting 222-32 error.
Can any one please help? Thanks |
|||
17-12-2018, 00:44 AM,
Post: #479
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
@jim jones
do you mean your key is not accepted by configassist or your key always deleted after going online? don't forget to:
|
|||
17-12-2018, 13:02 PM,
Post: #480
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Is there an difference between Xentry Diagnostic Openshell and XDOS or is it the same ?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
ostab, 54 Guest(s)
ostab, 54 Guest(s)
Return to TopReturn to Content