[savoy81]

Hello
I'm working on toyota land cruiser 2010 (98) 434 mhz lost key situation i took out ecu id and smart box then make it verstion and added key dig becz im using used smart key the smart key has regastered okay but car crank run for a second then off i read smart key 93c86 and load to tango key is regastered i changed both dumps by orginal dumps and add smart key dig then tryed to eyc ecu by obd jumber 4 -13 and 35 minute nothing happend car run and off
Is the problem ecu not learned ?
Any body try this before ? Any word can help
Thank you

[ucokseparoh]

Hello
I'm working on toyota land cruiser 2010 (98) 434 mhz lost key situation i took out ecu id and smart box then make it verstion and added key dig becz im using used smart key the smart key has regastered okay but car crank run for a second then off i read smart key 93c86 and load to tango key is regastered i changed both dumps by orginal dumps and add smart key dig then tryed to eyc ecu by obd jumber 4 -13 and 35 minute nothing happend car run and off
Is the problem ecu not learned ?
Any body try this before ? Any word can help
Thank you

As far as i know virgin/reset method should accept used smartkey.

I think to know the exact problem of your car you need to scan it my friend.

[savoy81]

Hello
I'm working on toyota land cruiser 2010 (98) 434 mhz lost key situation i took out ecu id and smart box then make it verstion and added key dig becz im using used smart key the smart key has regastered okay but car crank run for a second then off i read smart key 93c86 and load to tango key is regastered i changed both dumps by orginal dumps and add smart key dig then tryed to eyc ecu by obd jumber 4 -13 and 35 minute nothing happend car run and off
Is the problem ecu not learned ?
Any body try this before ? Any word can help
Thank you

As far as i know virgin/reset method should accept used smartkey.

I think to know the exact problem of your car you need to scan it my friend.

I did and found B2799