[copoutec]

Is a core duo with 4 GB of ram and 120 GB HDD enough to run this. Also link to torrent not seeding. Any place else to download. Thanks

[beemerboy88]

Is a core duo with 4 GB of ram and 120 GB HDD enough to run this. Also link to torrent not seeding. Any place else to download. Thanks

your hdd is not big enough

you need approx 120gb of free disk space for the VM.
The torrent is seeding ok (use utorrent).

[copoutec]

Is a core duo with 4 GB of ram and 120 GB HDD enough to run this. Also link to torrent not seeding. Any place else to download. Thanks

your hdd is not big enough

you need approx 120gb of free disk space for the VM.
The torrent is seeding ok (use utorrent).

Thanks

[gf3106]

I've updated the mod.

Now supports new ICOM A2 clone. So if you apply this mod the combined ISTA vm will work with ICOM A clone, ICOM A2 clone and ICOM emulator V3.1.

Does anyone have a link to the MOD? URL appears to be down. Thanks

[Dren1977]

I've updated the mod.

Now supports new ICOM A2 clone. So if you apply this mod the combined ISTA vm will work with ICOM A clone, ICOM A2 clone and ICOM emulator V3.1.

Does anyone have a link to the MOD? URL appears to be down. Thanks

here's a link.

[gf3106]

I've updated the mod.

Now supports new ICOM A2 clone. So if you apply this mod the combined ISTA vm will work with ICOM A clone, ICOM A2 clone and ICOM emulator V3.1.

Does anyone have a link to the MOD? URL appears to be down. Thanks

here's a link.

Many thanks

[susov8]

Hi, I would need to know how to find the driver for the head of a Clone Most Icom A2, connect the usb, but in the root installation version not find the required drivers, thanks and best regards.

[Dren1977]

Hi, I would need to know how to find the driver for the head of a Clone Most Icom A2, connect the usb, but in the root installation version not find the required drivers, thanks and best regards.

drivers??? try reading the manual (see attached)

[gf3106]

I am using the K+DCAN Snapshot and unfortunately the ICOM emulator CMD is crashing with with "EXCEPTION_ILLEGAL_INSTRUCTION pid=396" (according to log file) only when starting a new session in ISTA, it must be trying to establish a communication with the ICOM emu. Obviously I am unable to re-load the ICOM as I have no dongle, and reloading the snapshot ends in the same result. If I close the ISTA session, the ICOM runs fine.

I am pretty sure that this is being caused because I am using an AMD processor and the snapshot has been created using intel processor architecture, seems the major change of processor hardware must be causing the app to crash. I think a simple reboot, re-detection of hardware and insert of the dongle would fix the issue.

Don't suppose anyone has an AMD version of the D+KCAN snapshot! Or some other workaround I might be able to use?

Might just have to use another machine

[Dee67]

Hello all, need some help with this install. I have downloaded the files and extracted them using 7zip.
I had 37 zipped files and when clicked on file 1 it combined and now have a folder containing a single file ISTA-D_2.36_ISTA-P_2.50.2 7Z (38,624,876 in size). When i try to mount this using WinMount its not letting in the free version. Do i have to purchase the full version of WinMount? or am I doing something wrong? Thanks