Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Wastegate problem help
09-03-2018, 16:13 PM, (This post was last modified: 09-03-2018, 17:06 PM by B1257.)
Post: #31
RE: Wastegate problem help
(07-03-2018, 10:02 AM)Node Wrote:  Definely seems like that wire is broken.

It seems that between the probe 1 on X6722 Pin 1 and probe 2 on X60002 Pin 17 is a problem. May a broken cable or something like this. I would use a totally new one for a test direct from the ECU to the Solenoid. Than start the test again with the scope. Both PWM signals should match in the same way the second test circuit looks like.

Regards,
B1257
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Bmw G31 retrofit Mgu id7 atm problem intranet 20 2,375 Yesterday, 08:06 AM
Last Post: smilo
XZBMW NBT EVO Connected Drive problem after update I-Level SkeYT 47 4,715 22-04-2024, 11:44 AM
Last Post: kwat
  BMW E60 coding problem GarageX 8 356 02-04-2024, 10:07 AM
Last Post: GarageX
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 158 28-03-2024, 18:47 PM
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 261 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 270 25-03-2024, 21:55 PM
Last Post: BmwMerc
  BMW e39 530d 2001 problem after MAF change boweld11 3 162 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 355 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 4,296 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 306 24-03-2024, 09:38 AM
Last Post: pupu144

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content