[Stromag]

...installation something get wrong through installation BMW_ISPI_ISTA_DELTA-SDP_4.10.14.istapackage, can someone help me?
Extracting delta sdp/blp ok.

"ISTA Launcher Console v1.1.6516.22714
=====================================

Install packages from: C:\Temp\ISTA_Store\Downloads
ISTA installation location: C:\Rheingold
Current ISTA version: 4.09.33.21392
Current ISTA Diag Data version: 4.09.30
Current ISTA Local Data versions: [en-GB:[4.09.30]]
Current Service Data version: 4.10.13
Current Logistics Base version: 4.10.13

Press Enter to continue or Ctl-C to exit

Extracting: BMW_ISPI_ISTA_DELTA-SDP_4.10.14: Done.
Extracting: BMW_ISPI_ISTA-BLP_4.10.14: Done.
Installing: BMW_ISPI_ISTA_DELTA-SDP_4.10.14: Failed.
Installing: BMW_ISPI_ISTA-BLP_4.10.14:

Outch - looks like something went wrong....
Check the log file for details.
Going down - brace, brace, brace....


Installation elapsed time: 01:45.89

Press Enter to exitS"

istalauncherconsole log:



LG Thomas

BMW_ISPI_ISTA-META_SDP_4.09.30b.xml' could not be found.

[inspi1981]

All files done till yesterday, including BMW_ISPI_ISTA-META_SDP_4.10.13.xml

[gente]

Thanks but i do not think that Is the fault. Because every xml ask for the one before, so i would need all xml’s. Extracting is ok, but installing stopps with failure. Are this version for ista+, i unpacked 4.10.13 full and copied in data_swi. The same with blp 4.10.13 in data folder. Now i want to update with 4.10.14 have both files of xml (13/14) and sdp delta and blp files in the right folder.
LG Thomas

[inspi1981]

You just need the last .xml, which correspond to installed SDP and then the new one .xml

---

If You just unpack file, then is problém with missing registry

[Stromag]

The SDP XML of the installed Full SDP,
The SDP XML to install the Full SDP plus the SDP and BLP ISTAPackage.
If he extracts it and then installs everything is fine, what afterwards as missing in the log is no matter if he made the update.

Is in the Ista Reg also the SDP 4.10.13 deposited?

[gente]

Service data in ista+ are 4.10.13, reg must be ok.

[aknight720]

Thanks!!!!


4.10.14 what is istap equivalent in istalauncher?
in my case show 3.63.3 but sure i have this wrong.

SDP 4.09.20 was last version to update this.

[Stromag]

Service data in ista+ are 4.10.13, reg must be ok.

.
If everything was done right then it should also go through

[gente]

... nobody here looking on my log and can say what the failure is?
My opinion is a missing file in destination folder of rheingold as describing in log:

2018-03-08 20:21:04,383 [1] [ERROR] IstaLaucherServiceImpl.PerformServiceTasks - Exception occurred: System.IO.FileNotFoundException: Previous file not found!
Dateiname: "C:\Rheingold\PSdZ\data_swi\psdzdata\swe\btld\btld_000046b0.bin.009_001_004"

[Node]

Failure is that it wants to apply delta, but can't find original file. So either your original version is not what the registry says or it is totally broken.