Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[Solved] Retrofit 3AG & 688 on F036 problem
27-03-2018, 11:50 AM,
(This post was last modified: 27-03-2018, 16:52 PM by BaggieMatt.)
Post: #1
|
|||
|
|||
[Solved] Retrofit 3AG & 688 on F036 problem
Hi. Hopefully this will be an easy fix.
I have retrofitted Logic 7(688) and reverse camera (3AG) to my F036 (iLevel 15-07-506). I have used eSys to add the options to the FA and saved it to the car. Gone into expert -> coding and read the FA, activated it and then read SVT. Then coded HU, FEM & REM. The 2 ECUs appear in eSys now and also ISTA-D control unit tree. The Logic 7 works OK now but the TRSVC doesn't fully. Both appear in the list of ECUs but when I right click on them the options for CODE and Read coding data are both greyed out. In ISTA-D I can see 3 errors. AMPT: Control unit is not encoded to vehicle. TRSVC: Control unit is not encoded to vehicle and no current coding data stored. I am using eSys 3.27.1 and pszd V63 lite in TurboDriver's VM and an ICOM A2 clone. Could the fact I can't code them be down to mismatched VINs and if so which prog do I need to use to correct this? Alternatively is it because the iLevels will be different and I need to get them to the same? Or is it something else? Just looking for a pointer in the right direction. |
|||
27-03-2018, 11:56 AM,
Post: #2
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
You need to use Detect CAFD for SWE for each ecu then FA code them
|
|||
27-03-2018, 11:58 AM,
Post: #3
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
In ISTA-D I can see 3 errors. AMPT: Control unit is not encoded to vehicle. TRSVC: Control unit is not encoded to vehicle and no current coding data stored
No CAFD probably. Thats why its greyed out. Inject CAFD. |
|||
27-03-2018, 12:06 PM,
Post: #4
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
Did you change REM module?
Setubal-Portugal
|
|||
27-03-2018, 12:08 PM,
Post: #5
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
|
|||
27-03-2018, 12:18 PM,
Post: #6
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
(27-03-2018, 12:08 PM)BaggieMatt Wrote:(27-03-2018, 12:06 PM)Deimis Wrote: Did you change REM module? What part number is rem ? Setubal-Portugal
|
|||
27-03-2018, 14:12 PM,
Post: #7
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
(27-03-2018, 12:18 PM)Deimis Wrote:(27-03-2018, 12:08 PM)BaggieMatt Wrote:(27-03-2018, 12:06 PM)Deimis Wrote: Did you change REM module? According to the label 61359374507-01 which doesn't seem to a valid p/n. but identical to this one REM on eBay |
|||
27-03-2018, 14:17 PM,
(This post was last modified: 27-03-2018, 14:20 PM by Deimis.)
Post: #8
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
Try to inject cafd, if it does not work , then you must change to V1.
1 61 35 9 866 978 production 2 61 35 6 819 332 04.04.2017 3 61 35 6 809 049 07.03.2016 4 61 35 9 374 506 01.12.2016 5 61 35 9 362 394 21.03.2015 6 61 35 9 329 700 19.12.2014 Setubal-Portugal
|
|||
27-03-2018, 14:30 PM,
Post: #9
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
(27-03-2018, 14:17 PM)Deimis Wrote: Try to inject cafd, if it does not work , then you must change to V1. I have successfully injected the CAFd as both were missing it even though they came from working cars. On another issue, has anyone done the official retrofit of the reverse camera in a RHD car? I have the official instructions but I am at loss how to mount the control unit in the correct position. Unfortunately the instructions show only a picture in a LHD car and my RHD car has a FEM there and there doesn't appear to be anything visible to mount it on on the other side in the driver's footwell. I can obviously mount it on the top of the pedal trim or in the thick foam on the side of the carpet but would like to fit it in the correct position. |
|||
27-03-2018, 14:58 PM,
Post: #10
|
|||
|
|||
RE: Retrofit 3AG & 688 on F036 problem
Check in Ista or newtis.
Setubal-Portugal
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
G21 paddles retrofit | bm92 | 2 | 102 |
04-05-2024, 06:32 AM Last Post: Node |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,487 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 637 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,792 |
22-04-2024, 11:44 AM Last Post: kwat |
|
G82 rear tail lights CSL retrofit | Sauron | 10 | 804 |
20-04-2024, 07:35 AM Last Post: SANYA |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 891 | 468,278 |
20-04-2024, 01:05 AM Last Post: fe7565 |
|
Neck warmer retrofit | Just2fast5 | 5 | 401 |
17-04-2024, 11:20 AM Last Post: Spirit5676 |
|
ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 200 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 229 |
12-04-2024, 14:23 PM Last Post: DieStream |
|
F10 FLA retrofit | beng2k | 30 | 1,063 |
11-04-2024, 18:43 PM Last Post: beng2k |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content