[hog4]

You enable drive select without svm online coding? In A3 8v ?How you do it? Send me pm pleas !$!

[djalix]

I agree, using SVM the function registers to car extra features and when connected to German Computer on dealers, that function will be enabled as default. That doesn't mean it can't be enabled using VCDS only, the only difference is that when car is connected on German computer on any dealer, when if an SVM coding compare is carried out, feature will be disabled and must code again using VCDS.

I have enabled Drive Select, Hill Descent control, Cruise Control, PDC etc, all factory functions, on my car without SVM coding.

But when go to dealer I don't let them do the SVM comparing

Drive Select and Cruise Control are SWaP, the other features you mentioned can be activated via coding / adaptation but SWaP features cannot just be "coded".

[hog4]

So i can do it if I have Odis and geko account? I need to move swap activation from gateway low to gateway high ....

[djalix]

So i can do it if I have Odis and geko account? I need to move swap activation from gateway low to gateway high ....

If you are moving from Low to High gateway you would need to try and reactivate your "SVM activations" in order to restore the features. ODIS might not like this as your retrofitted gateway might be flagged as "not valid for the vehicle".

[hog4]

Infact if I try to do svm from guide function he told me that the component is not for the vehicle .
(Consult etka

[zvonexp]

also retrofitted riving mode selection but i don't know where to code it work.. coded what i found in engine, abs, central electronic, gateway, radio.. is there any way without dealer ?

[haty]

anybody has solved the problem ...i need this service too