Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
(SOLVED) E60 SZL, DSC error after attempted VO coding
31-03-2018, 20:45 PM,
(This post was last modified: 12-04-2018, 11:55 AM by willisodhiambo.)
Post: #1
|
|||
|
|||
(SOLVED) E60 SZL, DSC error after attempted VO coding
I was trying to code VO in E60 to change from Japan to ECE using abrites. Cant recall but I think i coded VO to DSC and SZL and AFS.
Now I have a DSC error on cluster and SZL error "not initialized" in ISTA, Attempts to initialize fail as the program seems to hang at the beginning when it requires lock to lock steering manipulation for active steering initialization. It is as if SZL is not being seen or has stopped transmitting or there is a mismatch between coding if related DSC partner ECUs. I have programed it with WINKFP successfully, then default coded it with NCSExpert. No luck. I am at a loss, the unit must be recoverable or there is a minor step am missing. Any leads? I would be grateful for suggestions. |
|||
01-04-2018, 10:29 AM,
Post: #2
|
|||
|
|||
RE: E60 SZL, DSC error after attempted VO coding
On which step intilization fails?
|
|||
03-04-2018, 07:52 AM,
Post: #3
|
|||
|
|||
RE: E60 SZL, DSC error after attempted VO coding
|
|||
03-04-2018, 11:14 AM,
Post: #4
|
|||
|
|||
RE: E60 SZL, DSC error after attempted VO coding
vin is written in szl?
|
|||
03-04-2018, 12:02 PM,
(This post was last modified: 03-04-2018, 12:03 PM by Silva1337.)
Post: #5
|
|||
|
|||
RE: E60 SZL, DSC error after attempted VO coding
(03-04-2018, 07:52 AM)willisodhiambo Wrote:(01-04-2018, 10:29 AM)Silva1337 Wrote: On which step intilization fails? Do you know that you need move steering wheel only few milimeters to left and right when performing calibration? You say angle not seen how about when you turn of engine? if you have inpa check uif of szl afs , and if vin not correct , correct it by flashing it , then code on empty man , then try perform calibration again. |
|||
12-04-2018, 11:56 AM,
(This post was last modified: 12-04-2018, 11:58 AM by willisodhiambo.)
Post: #6
|
|||
|
|||
RE: (SOLVED) E60 SZL, DSC error after attempted VO coding
Well the SZL was working before all this. The initial initialization instruction is to turn full lock both sides. Nothing was happening.
So someone with autoboss connected and performed the alignment straight up as they tell me. No idea why ISTA had a problem. Very funny. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
xdrive off with esys without error in dash | dankocg | 15 | 3,004 |
1 hour ago Last Post: kami2k |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 42 |
7 hours ago Last Post: Stratofortress |
|
BMW E71 EGS coding 8HP70 used | BS68 | 2 | 120 |
Yesterday, 23:40 PM Last Post: BS68 |
|
ISTA 4.47 test plan and error delete not available | bmwm3power | 6 | 378 |
Yesterday, 10:46 AM Last Post: beemered |
|
BMW E83 A1 error - MRS: No message from DSC ... | ivanp | 34 | 1,416 |
29-04-2024, 19:28 PM Last Post: ivanp |
|
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 82 |
27-04-2024, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,108 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 225 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 580 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
Esys error message only on EPS. ''Failed to get CAFs for SWE'' | arthur101 | 2 | 134 |
25-04-2024, 22:48 PM Last Post: arthur101 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content