Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

EDC17CP14 HW01 Immo transfer
05-04-2018, 16:10 PM,
Post: #1
ZTAudi  EDC17CP14 HW01 Immo transfer
Hi

My car has been victim of water in scuttle panel and ecu is badly damaged by water and car would'nt even crank. I purchased similar ecu with same HW number HW01 and managed to read both in bootloader mode. Would really appreciate if anybody can help to transfer immo data from original to new one as i don't want solution with immo light being lit on instrument panel.

In attachment original reads from original and new ecu which i want to use.

Regards
IMMO_MATCH.rar
File Type: .rar
Downloaded: 10 times
Size: 1.58 MB

Quote this message in a reply
05-04-2018, 16:54 PM,
Post: #2
RE: EDC17CP14 HW01 Immo transfer
Just flash original ecu boot read into replacement ecu. EEPROM, internal and external flash.

Keep all file backups just in case.
Quote this message in a reply
05-04-2018, 17:27 PM,
Post: #3
RE: EDC17CP14 HW01 Immo transfer
Won't work because of OTP areas, already tried that and it cranks but won't fire up throwing ECU hardware error..
Quote this message in a reply
05-04-2018, 17:34 PM,
Post: #4
RE: EDC17CP14 HW01 Immo transfer
Using KTAG?

I have cloned TC1797 (Mini/PSA mevd17) with MPPS, which simply skips OTP section and programs the rest, becomes perfect clone. But I never tried with KTAG. Does KTAG error out at OTP?
I am interested of outcome either way.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
05-04-2018, 18:25 PM, (This post was last modified: 05-04-2018, 18:26 PM by volavka.)
Post: #5
RE: EDC17CP14 HW01 Immo transfer
ECU hw and software are not compatible, the reason cannot clone it

Good luck yes

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
05-04-2018, 19:33 PM,
Post: #6
RE: EDC17CP14 HW01 Immo transfer
I do have original MAGPro2 X17 Master and tried their automatic helpdesk solution with same result (unable to clone due to sw being not compatible). Both ECU's are from same engine CAHA and manual transmission but one is from A4 B8 and one from A6 C6.

I will try to flash ECU with same software using ODIS engineering and see what will happen..

Regards
Quote this message in a reply
05-04-2018, 21:03 PM,
Post: #7
RE: EDC17CP14 HW01 Immo transfer
(05-04-2018, 19:33 PM)mbectb Wrote:  I do have original MAGPro2 X17 Master and tried their automatic helpdesk solution with same result (unable to clone due to sw being not compatible). Both ECU's are from same engine CAHA and manual transmission but one is from A4 B8 and one from A6 C6.

I will try to flash ECU with same software using ODIS engineering and see what will happen..

Regards

with proper immo off solution you will not have safe on dash..try good immo off + ori softwere(old ecu)
Quote this message in a reply
06-04-2018, 08:45 AM,
Post: #8
RE: EDC17CP14 HW01 Immo transfer
(05-04-2018, 16:10 PM)mbectb Wrote:  Hi

My car has been victim of water in scuttle panel and ecu is badly damaged by water and car would'nt even crank. I purchased similar ecu with same HW number HW01 and managed to read both in bootloader mode. Would really appreciate if anybody can help to transfer immo data from original to new one as i don't want solution with immo light being lit on instrument panel.

In attachment original reads from original and new ecu which i want to use.

Regards

try and report...
pass pm


Attached Files
IMMO_MATCH.rar
File Type: .rar
Downloaded: 4 times
Size: 1.58 MB

Quote this message in a reply
10-04-2018, 22:20 PM,
Post: #9
RE: EDC17CP14 HW01 Immo transfer
That's my original files
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  KIA MEDG17.9.8 immo off issues koziol 1 18 5 hours ago
Last Post: aboelgood
  I NEED PSA MD1CS003 IMMO OFF tokatli64 4 90 8 hours ago
Last Post: Le-Mans
  immo toyota yaris 89661-0d276 michelespl 1 40 Yesterday, 11:24 AM
Last Post: Black Alien
  Piaggio Porter 1.3 - Bosch M.7.8.0 F01R00DQ24 IMMO OFF blerim shehi 3 68 Yesterday, 10:25 AM
Last Post: ROD-BENDERS
XZBMW Bmw Me7.2 immo Off aboelgood 2 54 Yesterday, 09:58 AM
Last Post: aboelgood
  suzuki 2008 gsxr 750 immo off megodahab 0 22 25-04-2024, 18:47 PM
Last Post: megodahab
  KIA CEED EDC17C08 IMMO OFF crisvenua2 1 41 25-04-2024, 13:02 PM
Last Post: Stopro92
KOpel OPEL VECTRA MSA15 IMMO OFF HELP vaki1989 3 69 25-04-2024, 12:52 PM
Last Post: epasha
PPeugeot edc16CP39 PSA 4007 IMMO 0FF spoool 5 254 25-04-2024, 00:26 AM
Last Post: spoool
  valeo V42 Immo off kuki88 2 90 24-04-2024, 22:12 PM
Last Post: Abou-raffik

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content