[kmodel99]

Could you give tutorial for expert mode i have friend with this problem i will try myself
which ipo and prg i should choose what is index adress?

Just use google, search for WinKFP expert mode.
I think if your group is DSCA60 so use DSC60 and choose number which is closer to you (only last digits are other). Then you will know which file to choose and which address. (Mine was 29 as I remember but I’m not sure).

I have already removed the code fa and recoded dsc, kombi, szl, but I can not turn off the indicator for the steering angle. I tried to encode the dsc in comfort mode but can not do, if I understand correctly I have to code with winkft in expert mode. I can not find the file ending in .0da

You mean steering angle - DSC indicator (which flash when wheels are slipping?) or steering indicator (steering wheel with !, error for active steering). What error do you have on CCC, CIC? DSC error or active steering error?

If you code car correctly and remove fuse for AFS (active steering), then only error should be DSC indicator. Then you need to flash DSC with proper software.

And if you do flashing in WinKFP it stuck on 100% and “not responding”, just wait few minutes then close WinKFP, fee ignition cycle and it should start working.

You don’t need use 0da file (which is for DATA), DSC doesn’t have it, just skip it.

If you need I can help you by TeamViewer. I gave you a lot of hints. I’ve just get “maybe try flash DSC module with software without AFS” and I need to do some research on my own. So I found and just try.