[PhilipM]

OK, that part of the coding should help with some of the issues, the doors and windows, possibly adaptive headlights etc.
Airbags might need coding or a system time reset or steering angle adjustment.

[Impac]

With airbag i think its the usual Seat Occupancy passanger so just recode the airbag module and reset the system time with Tool32 ? Or do i need to disable the OC3 (nicht_aktiv) and than system start with tool32? Also I believe the mat under the seat needs to be disconnected, are there any other parameters to be set to nicht_aktiv besides the OC3?

[PhilipM]

Seat matts will be either OC3 or SBE1, disable which ever one is active with the seat matts unplugged and the errors can be cleared.

System time reset is easiest with ISTA/D, it might be in Tool32 somewhere, but check for the error codes first.

[Impac]

Thank you for all of your help, one more question so every time there is a airbag light and it gets coded system time has to be reset even for seat occupancy matt?

[PhilipM]

System time is usually only if a module is reprogrammed or changed. It might not be needed in your case.

[Impac]

Thank you for all of your help

[Impac]

PhilipM
Thank you for your help everything is working
Removed $812 & *NC72 ADD $801 & *NC71
Coded default
MASK, BFS, CAS, FAS, IHKA, KBM, TMBT, TMFT.
Thanks again