Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot Boxer 2013 new ECU Programing
07-06-2018, 10:14 AM,
Post: #1
|
|||
|
|||
Peugeot Boxer 2013 new ECU Programing
I have Peugeot Boxer 2013, i buy new ECU (not programed yet) and install it to the car.
I have 3 questions :- ***************** 1) Does the pin code of BSI is required in this process ? 2) Does the BSI's pin code which using to program the key is the same pin code of BSI which is used to program the new ECU ? 3) How can i program it to the car ? I see video entering injectors item then choose some configuration for A/C and other items .... Is this the right way ? |
|||
07-06-2018, 13:17 PM,
Post: #2
|
|||
|
|||
RE: Peugeot Boxer 2013 new ECU Programing
(07-06-2018, 10:14 AM)adel.nooh Wrote: I have Peugeot Boxer 2013, i buy new ECU (not programed yet) and install it to the car. After married BSI with ECU go to ecu and telecoding parameters
Pass in pm after press thanks and rep buttons " alt="" title=""> |
|||
08-06-2018, 18:36 PM,
Post: #3
|
|||
|
|||
RE: Peugeot Boxer 2013 new ECU Programing
I make the car work yesterday with the new ECU... I use many scanners with no response to any module except lexia3... The following steps what i did.:
1. I use lexia3 and choose boxer3 and i have no response to any modukes just like autel and x100 pad2. 2. I choose boxer3 Euro.. Now i got response to some modules like BSI, ECU is detected with title ECU not recognized. 3. I choose repair then ECU then package repair then Replacement ECU. 4. I connect old ECU as the instructions says then press next and connect new ECU again and press next and wait 300 seconds (5 min). 5. Then i begin to code the injectors... I got the codes from injector itself, each code consist of 6 chaecters (letters or numbers) It takes 60 seconds make switch off and on twelve times each one consume 5 seconds. 7. After that i finish the programing and go to configuration and choose if there is cruise control or A/C. 8. Now i delete the errors and run the car. I didnt enter vin or pin code or sync ECU with BSI... I dont know if i missing something or not but the title of ECU not recognized still exist even the car is working now |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
virgin BSI peugeot 407 | pistolo30 | 3 | 83 |
28-04-2024, 17:41 PM Last Post: rhj |
|
Peugeot 407 bsi virgin | NTec | 2 | 80 |
23-04-2024, 09:36 AM Last Post: sixcode |
|
9659285380 VALEO Peugeot 207 BSI 2004 P06-00 | niktele | 2 | 99 |
14-04-2024, 11:27 AM Last Post: KeyCoche |
|
Immo off EDC15C7 Jumper/Boxer 2,2 HDI | autoconnect | 3 | 108 |
14-04-2024, 07:55 AM Last Post: KeyCoche |
|
Solved ✔ peugeot 508 med17.4.2 | pyvotel | 2 | 120 |
12-04-2024, 13:02 PM Last Post: ROD-BENDERS |
|
Solved ✔ Peugeot 207 MEV17.4 Immo off | filxomor | 3 | 198 |
12-04-2024, 10:08 AM Last Post: filxomor |
|
peugeot 508 2014 pin code BSI vin | Gigsinatra | 3 | 158 |
10-04-2024, 22:26 PM Last Post: volavka |
|
cheeroke 2013 skim problem | ka_rai | 0 | 45 |
01-04-2024, 14:50 PM Last Post: ka_rai |
|
edc17c10 peugeot immo off | filxomor | 4 | 209 |
29-03-2024, 16:52 PM Last Post: ROD-BENDERS |
|
Solved ✔ PEUGEOT PIN FROM BSI DUMP | MARTINS AUTOMECH | 3 | 213 |
26-03-2024, 05:51 AM Last Post: MARTINS AUTOMECH |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content