[adel.nooh]

I have Peugeot Boxer 2013, i buy new ECU (not programed yet) and install it to the car.
I have 3 questions :-
*****************

1) Does the pin code of BSI is required in this process ?

2) Does the BSI's pin code which using to program the key is the same pin code of BSI which is used to program the new ECU ?

3) How can i program it to the car ? I see video entering injectors item then choose some configuration for A/C and other items .... Is this the right way ?

[Le-Mans]

I have Peugeot Boxer 2013, i buy new ECU (not programed yet) and install it to the car.
I have 3 questions :-
*****************

1) Does the pin code of BSI is required in this process ?

Yes you need pin code

2) Does the BSI's pin code which using to program the key is the same pin code of BSI which is used to program the new ECU ?

The pin code must enter to ecu with telecoding

3) How can i program it to the car ? I see video entering injectors item then choose some configuration for A/C and other items .... Is this the right way ?

After married BSI with ECU go to ecu and telecoding parameters

[adel.nooh]

I make the car work yesterday with the new ECU... I use many scanners with no response to any module except lexia3... The following steps what i did.:
1. I use lexia3 and choose boxer3 and i have no response to any modukes just like autel and x100 pad2.

2. I choose boxer3 Euro.. Now i got response to some modules like BSI, ECU is detected with title ECU not recognized.

3. I choose repair then ECU then package repair then Replacement ECU.

4. I connect old ECU as the instructions says then press next and connect new ECU again and press next and wait 300 seconds (5 min).

5. Then i begin to code the injectors... I got the codes from injector itself, each code consist of 6 chaecters (letters or numbers)
It takes 60 seconds make switch off and on twelve times each one consume 5 seconds.

7. After that i finish the programing and go to configuration and choose if there is cruise control or A/C.

8. Now i delete the errors and run the car.

I didnt enter vin or pin code or sync ECU with BSI... I dont know if i missing something or not but the title of ECU not recognized still exist even the car is working now