Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CID failure during ID4 to ID5 Update
12-06-2018, 00:55 AM,
(This post was last modified: 12-06-2018, 00:56 AM by mcrussell.)
Post: #1
|
|||
|
|||
CID failure during ID4 to ID5 Update
Hi guys, just flashed an ID4 to ID5 with apix2 screen, flash went successful but I have No Signal on display, triple checked coding & even tried coding apix1 but can’t get a picture, I got blue screen showing flash progress up until btldr finished then no signal for the remainder of programming, unit codes fine, loaded fscs & radio works etc but can’t get a picture.
Has anyone had cid failure during flashing? Quick update, tried an apix1 CID & it works, looks like flashing has killed the apix2 CID somehow |
|||
12-06-2018, 08:00 AM,
Post: #2
|
|||
|
|||
RE: CID failure during ID4 to ID5 Update
(12-06-2018, 00:55 AM)mcrussell Wrote: Hi guys, just flashed an ID4 to ID5 with apix2 screen, flash went successful but I have No Signal on display, triple checked coding & even tried coding apix1 but can’t get a picture, I got blue screen showing flash progress up until btldr finished then no signal for the remainder of programming, unit codes fine, loaded fscs & radio works etc but can’t get a picture.Hi Because nbt b14x units on id4 they support APIX2 cid but when upgrade to id5 somehow bootloader cant load picture in screen , if you code unit with apix2 and SPI and do several restart (tool32) you will get picture but if restart again you loose it , the issue is only after upgrade
|
|||
12-06-2018, 09:19 AM,
Post: #3
|
|||
|
|||
RE: CID failure during ID4 to ID5 Update
Thanks for the reply, so for all ID4 to ID5 it’s best to use an apix1 screen to prevent problems, is it only f30 APIX2 CID that suffer from this?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content