Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E60 partial LCI conversion
14-06-2018, 03:09 AM,
(This post was last modified: 14-06-2018, 03:10 AM by lustek.)
Post: #1
|
|||
|
|||
E60 partial LCI conversion
Hi,
I need to code LCI headlights to PRE LCI E60. everything works fine except Angel Eyes - they turn off after a few seconds. I changed the module on LM2 and code it into the car. Unfortunately, the problem is still there. If I change pins in X12: 25 -> 63 and 40 -> 11 will it work? Adding the +mueb option completely disables the tail lamps (pre-lci). I would not like to change anything there. thanks for the help If I helped, please magic buttons thx+rep
|
|||
14-06-2018, 05:50 AM,
Post: #2
|
|||
|
|||
RE: E60 partial LCI conversion
Yes you need to mpve pins. As the outputs from lm now is low power. Or you can fit led bulbs.
|
|||
Reputation: +1 - lustek [+1] | |||
14-06-2018, 07:49 AM,
Post: #3
|
|||
|
|||
RE: E60 partial LCI conversion
(14-06-2018, 03:09 AM)lustek Wrote: Hi, follow the pdf for front headlights , if you didn't do rear LCI then you can't use +mueb , it's for complete LCI conversion . you can read coding file before +meub and after , then you compare both trace files and manually reverse back coding only for taillights . to make it easier for you , here is the rear coding for LCI taillights with LM2 , just reverse the coding basically . or post both trc files and I will help you with it |