[mcrussell]

Hi guys,

Wonder if anyone could assist, I retrofitted TV in my f15 & wanted to update the module, it calculated the TAL & I used HWID from ECU to calculate, BTLDR & SWFL went fine but it failed on injecting the CAFD, I can talk to it with Tool32 but no matter what istep I use I cannot get it to find a different BTLDR or SWFL that will let me code it, below is the error when trying to code.

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2018/06/23-17:09:19.001
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[TV_MODUL - 4B] prepareECUforCoding started
MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>
[TV_MODUL - 4B] prepareECUforCoding error
[TV_MODUL - 4B] There was an error during TAL execution, please check the log files.
[TV_MODUL - 4B] - [Exception - TV_MODUL - 4b] Exception occurred: job failed with negative response error:
code: service returned global negative response
description: Service DSC returned a negative response with response code subFunctionNotSupported; LinkName: TV_MODUL_4B_ETHERNET
severity: ERROR

Timestamp: Sat Jun 23 17:09:27 BST 2018
ErrorCategory: VEHICLE_ERROR ID: 433
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=TAL, ecuid=(TV_MODUL,0x4b), TA_CATEGORY=cdDeploy, PROGRAMMING_STATUS=prepareECUforCoding,PSdZEvent={message=MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>, timestamp=Sat Jun 23 17:09:27 BST 2018, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__, event id=default, event type=DiagService error, ECUId:TV_MODUL_0x4B}}
[TV_MODUL - 4B] finalizeECUCoding started
[TV_MODUL - 4B] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "11s". [C206]
Abarbeitung beendet

[kmodel99]

Read errors with ISTA+, check if TV module is red on control unit tree.

[mcrussell]

It is red on the tree but I can see it in esys & tool32

apiJob("TVM2_T2","svk_lesen","","")

Satz : 0
OBJECT = tvm2_t2
SAETZE = 4
JOBNAME = svk_lesen
VARIANTE = TVM2_T2
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
PROG_TEST = 1 00 01 ..
PROZESSKLASSE_WERT = 1 00 01 ..
PROZESSKLASSE_TEXT = Hardware (Elektronik)
PROZESSKLASSE_KURZTEXT = HWEL
SGBM_IDENTIFIER = 00002AA1
VERSION = 003.000.000
SGBM_ID = HWEL-00002AA1-003.000.000
Satz : 2
PROZESSKLASSE_WERT = 6 00 06 ..
PROZESSKLASSE_TEXT = Bootloader
PROZESSKLASSE_KURZTEXT = BTLD
SGBM_IDENTIFIER = 000030B1
VERSION = 001.000.017
SGBM_ID = BTLD-000030B1-001.000.017
Satz : 3
PROZESSKLASSE_WERT = 8 00 08 ..
PROZESSKLASSE_TEXT = Software ECU Speicherimage
PROZESSKLASSE_KURZTEXT = SWFL
SGBM_IDENTIFIER = 000030B2
VERSION = 006.000.011
SGBM_ID = SWFL-000030B2-006.000.011
Satz : 4
ANZAHL_EINHEITEN = 3 00 03 ..
PROG_DATUM = 22.06.18
PROG_KM = 0 00 00 00 00 ....
JOB_STATUS = OKAY
_REQUEST = 3 Bytes
0000 : 22 F1 01 "ñ.
_RESPONSE = 44 Bytes
0000 : 62 F1 01 01 01 00 03 18 06 22 8F 04 D2 01 00 00 bñ...... .".Ò...
0010 : 10 00 00 00 01 00 00 2A A1 03 00 00 06 00 00 30 .......* ¡......0
0020 : B1 01 00 11 08 00 00 30 B2 06 00 0B ±......0 ²...

---

this is the error when i attempt to code it:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2018/06/23-22:36:20.123
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[TV_MODUL - 4B] prepareECUforCoding started
MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>
[TV_MODUL - 4B] prepareECUforCoding error
[TV_MODUL - 4B] There was an error during TAL execution, please check the log files.
[TV_MODUL - 4B] - [Exception - TV_MODUL - 4b] Exception occurred: job failed with negative response error:
code: service returned global negative response
description: Service DSC returned a negative response with response code subFunctionNotSupported; LinkName: TV_MODUL_4B_ETHERNET
severity: ERROR

Timestamp: Sat Jun 23 22:36:28 BST 2018
ErrorCategory: VEHICLE_ERROR ID: 433
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=TAL, ecuid=(TV_MODUL,0x4b), TA_CATEGORY=cdDeploy, PROGRAMMING_STATUS=prepareECUforCoding,PSdZEvent={message=MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>, timestamp=Sat Jun 23 22:36:28 BST 2018, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__, event id=default, event type=DiagService error, ECUId:TV_MODUL_0x4B}}
[TV_MODUL - 4B] finalizeECUCoding started
[TV_MODUL - 4B] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "11s". [C206]
Abarbeitung beendet

[mcrussell]

This is the TAL based on my FA F025-14-11-506 with $601 & HO Word TVT2, also after clicking HW ID from SVT

[milkyway]

Hello!

You cannot change the Bootloader in this way. Just create your own TAL with an update of btl, Swfl, FLSL and CAFD based on the existing files in the ECU.

CU Oliver

[mcrussell]

Thanks for the reply, I’m not sure whether those files are correct though as the first update I did I forgot to save the SVT_IST so I’m not sure they are correct.
Is there a way to determine the correct files required from the label?

---

I don’t think there where any flsl files in there originally either, what do they do?

[mcrussell]

Just flashed again with original TAL but still doesn't accepted CAFD