[autoraedarum]

I will disable the ABS because the pump motor is not OK.

I remove in FA the $630 for ABS and do the coding with NCS expert in each ECU.
I disable the coding also in the trc files

But when i start Rheingold i see the ABS in bike details.

In attachment the trc files from Kombi, ZFE and BMSKP. But in BMSKP i do not find how disable ABS.

R1200GS.rar
File Type:
Downloaded:	15 times
Size:	30.79 KB

[14TLC]

I will disable the ABS because the pump motor is not OK.

I remove in FA the $630 for ABS and do the coding with NCS expert in each ECU.
I disable the coding also in the trc files

But when i start Rheingold i see the ABS in bike details.

In attachment the trc files from Kombi, ZFE and BMSKP. But in BMSKP i do not find how disable ABS.

I don't have NCS installed at the moment so I can't check nettodata files. Can you read and send me the FSW_PSW.TRC files for each module separately.

[autoraedarum]

Here the files

I have disabled the ABS in ZFE and Kombi, but maybe it`s not enough

FSW_PSW.rar
File Type:
Downloaded:	17 times
Size:	2.14 KB

[14TLC]

Here the files

I have disabled the ABS in ZFE and Kombi, but maybe it`s not enough

Send me also the FSW_PSW.TRC from DME and KOMBI. There should be line for the ABS in the DME also.

Which year model is the bike? And which Type number? Or maybe send me the VIN on PM to check which type of ABS it has.

[autoraedarum]

Sorry i thought i put all files in rar.

Here all files

FSW_PSW.rar
File Type:
Downloaded:	10 times
Size:	3.51 KB

VIN: ZU07467 

[14TLC]

Do you get flashing ABS symbol on KOMBI when you turn on the bike?
Are there any active errors when you test the bike with ISTA/D?

[autoraedarum]

Yes red lamp is on but not flashing.
There are an error from the pump motor. I removed the ABS unit and connect the pump motor to a battery, but there is not running. So i would disable the ABS

[14TLC]

Yes red lamp is on but not flashing.
There are an error from the pump motor. I removed the ABS unit and connect the pump motor to a battery, but there is not running. So i would disable the ABS

I meant what active errors you have in ISTA and what you have on KOMBI for the ABS after coding out the ABS.

---

Do you see the ABS in the ECU Tree tab in ISTA?

[autoraedarum]

Now i have disconnect the ABS, light is off, no ABS in the tree, but in DME and ZFE an error about CAN communication is missing.

Maybe is psoosible to to with other coding, but when not is also OK.

[Vojno]

If you delete the FA$630 you must coded all module, and write VO to KOMBI and ZFE.
If is not help, then try with ISTA-P to reprogrammed all ECU.

Otherwise the pump motor can be repaired.