Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO - occasional black screen
02-07-2018, 10:29 AM,
Post: #1
|
|||
|
|||
NBT EVO - occasional black screen
I recently flashed my EVO ID5 unit with the latest PSDZDATA, FSC are patched codes.
Since the flash I have re-installed into the car - was EVO ID4 from factory - I am occasionally getting nothing on the CID - the radio continues to play but the screen is black. If I reboot the unit it comes back ok. It has been very warm here in the UK, so I wondered if it was a temperature protection issue or if it's a problem with the patched codes? Everything works fine, all online services are 100%. Car was left in a garage last night and no issues this morning when I left for work. Has anyone else encountered this? |
|||
05-07-2018, 11:02 AM,
Post: #2
|
|||
|
|||
RE: NBT EVO - occasional black screen
Anyone experinced this issue?
Happened 3 times yesterday - car had been sat in direct sunlight all day & cabin was hot. |
|||
05-07-2018, 11:22 AM,
Post: #3
|
|||
|
|||
RE: NBT EVO - occasional black screen
Perform a diagnosis. If display was shutdown due to overheat it will be recorded as a trouble.
|
|||
05-07-2018, 11:33 AM,
Post: #4
|
|||
|
|||
RE: NBT EVO - occasional black screen
I've checked ISTA - not seeing anything temperature related.
I've attached a screen shot from ISTA |
|||
05-07-2018, 12:10 PM,
Post: #5
|
|||
|
|||
RE: NBT EVO - occasional black screen
remove error B7F8E5 with ISTA+,
BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
05-07-2018, 13:17 PM,
Post: #6
|
|||
|
|||
RE: NBT EVO - occasional black screen
|
|||
05-07-2018, 13:35 PM,
(This post was last modified: 05-07-2018, 13:35 PM by Node.)
Post: #7
|
|||
|
|||
RE: NBT EVO - occasional black screen
There is your error: internal fault in CID. So basically CID crashes on hot days. You may try to flash the latest software to it, but the hardware may be faulty. What action ISTA recommends for that error?
|
|||
05-07-2018, 14:03 PM,
Post: #8
|
|||
|
|||
RE: NBT EVO - occasional black screen
(05-07-2018, 13:35 PM)Node Wrote: There is your error: internal fault in CID. So basically CID crashes on hot days. You may try to flash the latest software to it, but the hardware may be faulty. What action ISTA recommends for that error? ISTA says if there is still a blank screen - replace CID. There isn't any way to flash firmware to the CID, it does not show in esys/ISTA+ as a flashable ECU. I have a spare screen, I will test that tomorrow. |
|||
06-07-2018, 08:13 AM,
Post: #9
|
|||
|
|||
RE: NBT EVO - occasional black screen
Sounds like an overheating issue or incompatibility of languages between CID and KOMBI.
|
|||
06-07-2018, 08:25 AM,
Post: #10
|
|||
|
|||
RE: NBT EVO - occasional black screen
(06-07-2018, 08:13 AM)Almaretto Wrote: Sounds like an overheating issue or incompatibility of languages between CID and KOMBI. CID is original to the car (APIX1) car came with EVO iD4. I upgraded to a new headunit on iD5 - all was fine then I flashed with new firmware and updated maps to 2018-2 then I started getting the black screen. now, it is unseasonably warm in the UK at the moment - we are having a heatwave. I have swappped the headunit back to the original iD4 HU and the car is parke din the sun at the moment - hoping the same fault will appear........ I'd be surprised if it were the firmware, i think it's just conincidental but the test today should rule that out. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
APIX1 black screen fix for 23-07 EVO HW2.3 | superwofy | 22 | 1,739 |
24-04-2024, 06:29 AM Last Post: sambir |
|
F20 LCI2 black panel cluster coding | sqorpius | 9 | 2,010 |
21-04-2024, 12:38 PM Last Post: Adekborys69 |
|
Screen Mirroring not working on EVO | painsage | 5 | 300 |
10-04-2024, 15:05 PM Last Post: painsage |
|
NBT ID3 screen on ID4 flashed to ID6 | Driss2 | 2 | 233 |
27-03-2024, 11:46 AM Last Post: RuleNormaliai |
|
BMW F25 screen change | m4rrtin | 1 | 168 |
25-02-2024, 19:36 PM Last Post: Bakica |
|
APIX1 screen with touch ? | oros | 1 | 196 |
25-02-2024, 19:03 PM Last Post: zero9 |
|
Coding normal Cluster to Black Panel X1 F48 | SteelFK1 | 7 | 428 |
10-02-2024, 18:07 PM Last Post: BMWzone |
|
Solved ✔ Cas3 black disable elv | sokisoki3 | 6 | 598 |
25-01-2024, 11:35 AM Last Post: sokisoki3 |
|
G12 touch screen in F10 apix1 enclosure ? | RomeyRome | 8 | 1,134 |
19-01-2024, 19:19 PM Last Post: Mwahab |
|
ATM black box - no communication | Krysiaman | 0 | 154 |
07-01-2024, 09:46 AM Last Post: Krysiaman |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content