[Napas]

TCB to ATM we can only move the e-Sim
The modem IMEI is not transferable

Or we are allowed to buy an ATM on BMW and get it register to our VIN and we should be fine
Or The Connected services support update our IMEI on the BMW DB - you may fetch the IMEI with Tool32

Like you all, I'm stuck only with the remote services not working

[walkernight88]

TCB to ATM we can only move the e-Sim
The modem IMEI is not transferable

Or we are allowed to buy an ATM on BMW and get it register to our VIN and we should be fine
Or The Connected services support update our IMEI on the BMW DB - you may fetch the IMEI with Tool32

Like you all, I'm stuck only with the remote services not working

Unfortunately BMW will not register it to your VIN, after they sell it to you. They will open a ticket and close it fast with "the vehicle identified with VIN xxxxxxx is not supporting part number yyyyyy". At least here in Romania that's what they do. And I tried to call center - conn drive, and they told me maybe, if I come personally in Germany at a stealership. But it's with a big maybe.

"you may fetch the IMEI with Tool32", or you may look on the sticker on TCB/ATM. There's IMEI and ICC ID.

[jce777]

I swapped my esim to the new unit and ICCID is now updated on the unit.

However nothing works, ATM has already been coded, is there a way to reset provisioning?

For those who transferred the Qualcomm chip did you transfer just the chip or the whole package?

[DayvG]

Make sure you login on the idrive and update BMW services.

[walkernight88]

I swapped my esim to the new unit and ICCID is now updated on the unit.

However nothing works, ATM has already been coded, is there a way to reset provisioning?

For those who transferred the Qualcomm chip did you transfer just the chip or the whole package?

To reset provisioning, tool32 nbtevo -> steuern_routine -> ARG;RESET_DATABASES;STR; and you need one more argument which you can find in sg table. I don't know from my head but dig there and you'll find it. Something like 0x00000080.

[jce777]

Make sure you login on the idrive and update BMW services.

Thanks for your reply.

Update BMW services is greyed out.

---

I swapped my esim to the new unit and ICCID is now updated on the unit.

However nothing works, ATM has already been coded, is there a way to reset provisioning?

For those who transferred the Qualcomm chip did you transfer just the chip or the whole package?

To reset provisioning, tool32 nbtevo -> steuern_routine -> ARG;RESET_DATABASES;STR; and you need one more argument which you can find in sg table. I don't know from my head but dig there and you'll find it. Something like 0x00000080.

Done!

Nothing changed after this, just all the apps on connected drive are gone.

Should anything else be done afterwards?

[walkernight88]

Make sure you login on the idrive and update BMW services.

Thanks for your reply.

Update BMW services is greyed out.

---

I swapped my esim to the new unit and ICCID is now updated on the unit.

However nothing works, ATM has already been coded, is there a way to reset provisioning?

For those who transferred the Qualcomm chip did you transfer just the chip or the whole package?

To reset provisioning, tool32 nbtevo -> steuern_routine -> ARG;RESET_DATABASES;STR; and you need one more argument which you can find in sg table. I don't know from my head but dig there and you'll find it. Something like 0x00000080.

Done!

Nothing changed after this, just all the apps on connected drive are gone.

Should anything else be done afterwards?

Haha, well you asked how to reset provisioning. Now if ATM has data connection, the Update Services button should be available. And you can update services to restore provisioning. But in your case, having it grayed out, seems like your ATM SIM is deactivated. On ATM.prg, at last_call (status_lesen, ARG; last call something) you got an ip for Data Connection?

[jce777]

Make sure you login on the idrive and update BMW services.

Thanks for your reply.

Update BMW services is greyed out.

---

I swapped my esim to the new unit and ICCID is now updated on the unit.

However nothing works, ATM has already been coded, is there a way to reset provisioning?

For those who transferred the Qualcomm chip did you transfer just the chip or the whole package?

To reset provisioning, tool32 nbtevo -> steuern_routine -> ARG;RESET_DATABASES;STR; and you need one more argument which you can find in sg table. I don't know from my head but dig there and you'll find it. Something like 0x00000080.

Done!

Nothing changed after this, just all the apps on connected drive are gone.

Should anything else be done afterwards?

Haha, well you asked how to reset provisioning. Now if ATM has data connection, the Update Services button should be available. And you can update services to restore provisioning. But in your case, having it grayed out, seems like your ATM SIM is deactivated. On ATM.prg, at last_call (status_lesen, ARG; last call something) you got an ip for Data Connection?

Well at least provisioning was reset! The sim was working fine on the last ATM, seems I got IP, last_call says too less data.

[Gatsby79]

Does esim from 3G tcb version can be swapped into 4G atm version? will work?

[DayvG]

Does esim from 3G tcb version can be swapped into 4G atm version? will work?

That’s literally what this entire thread is about, did you actually read any of it?