Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Older datens for EHB70 downgrade needed
22-01-2019, 21:07 PM,
(This post was last modified: 10-05-2019, 06:35 AM by ____ANGEL___.)
Post: #11
|
|||
|
|||
RE: Older datens for EHB70 downgrade needed
(22-01-2019, 19:50 PM)heze Wrote:(04-10-2018, 01:08 AM)ds2k Wrote: Yes I used Comfort mode then Update ZUSB then Program ZUSB update. It ran until 100% and thrown error. Error log is attached. after a flash procedure, car wake up eating a lot of amps... i suggest you to reflash it with ICOM and a good power supply like this not so expensive but really good... Flashing with icom avoid a lot of problems because some ecus change communication baudrate when do ediabas signature pruefen process... if signature cannot be done, then ecu don't work. Usb cable can't adapt baudrate when it changes, so can't finish the flash process and you stuck on status 12. You cannot update this module with k+dcan cable, all the people who tries to update through k+dcan will fail, see the std_odb log here from others... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content