[EdgaBMW]

Thanks for the reply!
Sorry i'm newbie in E-sys What exactly do you have in mind "make sure you let ESYS probe the modules to generate the SVT instead of reading it out of the VCM." Then what do button "HW-IDs from SVTactual"?

Thanks

In The SVT Actual section of the TAL calculation page there are two buttons Read SVT and Read(ECU).

You should click the read(ECU) button.
This let's ESYS search for modules on all networks of the car instead of reading the SVT from the VCM.

If you ticked the option to write VCM after TAL execution it will write the SVT you're working with to the car's VCM.

The VCM is only a place holder to store the car's FA, I-step records and SVT.
Therefor if you read the SVT out of the VCM it might still list your old KOMBI, while if you let ESYS probe for ECU's it will detect your new 6WA cluster

Thanks again, i will try tomorrow again
Can you please tell me what do button "HW-IDs from SVTactual"?
I thought that when you press it after svt_soll calculaction, it's no need find actual i-level of ecu?