Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Read/Write 512kb on Ms42
11-10-2018, 16:49 PM,
Post: #11
|
|||
|
|||
RE: Read/Write 512kb on Ms42
(11-10-2018, 16:33 PM)Enabled Wrote: I have used windows 7 and windows 8.1, there shouldn't be a problem with Windows 10. You can attempt win7 compatibility, and as admin. Okey! I have tried with the compatibility mode as admin but its the same. Do you know if kess v2 or any other software has the ability to read/write full flash on ms42? |
|||
11-10-2018, 17:38 PM,
(This post was last modified: 11-10-2018, 17:51 PM by Enabled.)
Post: #12
|
|||
|
|||
RE: Read/Write 512kb on Ms42
Kess probably not.
Most other programs crash when trying to write to the boot sector. Send me a PM with your email or some kind of communication, teamviewer, etc. I have an alternative method to help for immediate purposes. |
|||
11-10-2018, 18:00 PM,
Post: #13
|
|||
|
|||
RE: Read/Write 512kb on Ms42
try "siemens flash tool" as far as I remember it can read out full flash trough OBD
|
|||
16-10-2018, 17:28 PM,
Post: #14
|
|||
|
|||
RE: Read/Write 512kb on Ms42
Thanks everyone for helping! Today I received my new cable and now it finally connected! (VAG-COM KKL 409.1)
However, it only connect using this method: 1. Connect everything - OBD, ECU and boot pin, but only to (-) Battery. 2. Plugin OBD usb to computer 3. Open Jmgarage 4. Connect cable to (+) on battery and hit connect immediately! I got Jmgarage to write a virginized file successfully but INPA cant synchronize with EWS, I only get "NO RESPONSE FROM CONTROL UNIT" then I get error code 209 "Manipulation protection EWS". Do you guys have any advice on how to get them synchronized? |
|||
16-10-2018, 22:58 PM,
Post: #15
|
|||
|
|||
RE: Read/Write 512kb on Ms42
(16-10-2018, 17:28 PM)Sorken Wrote: Thanks everyone for helping! Today I received my new cable and now it finally connected! (VAG-COM KKL 409.1) set latency timer of COM port to 1 or 16ms then try again Press and, If this post helped you.
|
|||
17-10-2018, 17:01 PM,
Post: #16
|
|||
|
|||
RE: Read/Write 512kb on Ms42
(16-10-2018, 22:58 PM)AutoExe3219 Wrote:(16-10-2018, 17:28 PM)Sorken Wrote: Thanks everyone for helping! Today I received my new cable and now it finally connected! (VAG-COM KKL 409.1) I have tried that with no success. Is INPA capable of doing a synchronize with a virginized ECU, or am I forced to use antoher software like GT1? |
|||
17-10-2018, 19:21 PM,
(This post was last modified: 17-10-2018, 19:36 PM by Enabled.)
Post: #17
|
|||
|
|||
RE: Read/Write 512kb on Ms42
If you have it, use ISTA.
Did you do the virginize correctly? I have done so many of these... I will look for the tool32 command sequence, but INPA should have worked. In INPA you should be using the F1 button (first button), to transfer the start value from EWS to DME. |
|||
18-10-2018, 15:35 PM,
Post: #18
|
|||
|
|||
RE: Read/Write 512kb on Ms42
(17-10-2018, 19:21 PM)Enabled Wrote: If you have it, use ISTA. I dont have ISTA, but at the moment I am trying to install dis.v44. I believe so, the file has been used by many and the writing went okay. I checked the ISN and it was cleared with FF. Is there something else I should check? I get error from pressing F1 and F2. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 771 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
Winkfp cannot read uif | MPTeam | 7 | 226 |
27-04-2024, 19:07 PM Last Post: MPTeam |
|
Coapi 2062 trying to FA WRITE | GoNz0- | 2 | 137 |
19-04-2024, 18:22 PM Last Post: GoNz0- |
|
Tool for bench read 8hp | Garryq | 9 | 1,697 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Tool for OBD read / write ZF 8hp | TIGHTFIN | 7 | 807 |
10-03-2024, 07:46 AM Last Post: syrus |
|
BMW X1 U11 Valeo / Magna Transmission read ISN | Emmy | 0 | 166 |
20-02-2024, 15:30 PM Last Post: Emmy |
|
Which eeprom and how to read in f10 Standard cluster | budddyyy | 3 | 233 |
25-11-2023, 17:03 PM Last Post: pawelkos |
|
EntryNav2 does not read MP3 | PUMUKY1 | 2 | 212 |
02-11-2023, 18:52 PM Last Post: PUMUKY1 |
|
BMW e60 can not read coding ncs expert from Airbag | brahem | 10 | 769 |
18-09-2023, 16:47 PM Last Post: brahem |
|
Tool32 command to write Map FSC to CIC E-Series? | bmchicago | 4 | 718 |
03-08-2023, 12:42 PM Last Post: smercki |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content