[Bimmer540]

7643097 is no ZB number but the HW number

Okay zb-number is: 7644109

Where did you get info from second picture?

[lustek]

Ok. So look in .his file for that number

[Bimmer540]

Ok. So look in .his file for that number

And what is now the update ZB-Number?

[lustek]

Search one more time for 7644109.
- If you found that number in first column the new number will be in second column. You must then search for that new number and check if it is in first or second column. If in second it's your newest zbnumer. Else you must one more time search number from second column.

- if you found that number only in second column then 7644109 is the newest zbnumer.

[Bimmer540]

The I-level from car is E070-13-07-506, when I udate with Ista-p to E070-16-11-500 then the EGS will not update? (because I use now spdaten from 3.65.2)

[Fatalix]

The I-level from car is E070-13-07-506, when I udate with Ista-p to E070-16-11-500 then the EGS will not update? (because I use now spdaten from 3.65.2)

Try and calculate a measures plan and select programming of EGS, then read out which ZB nr ISTA-P will use compared to your current.

[willisodhiambo]

You are wasting your time because 7644109 is the latest ZUSB for GKE233

;SG-TYP: GKE233
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
7644109,0000000,7643097,A,7644110DA,0FFFFFFFFFD,000,1 4
7643117,0000000,7643097,A,7643118DA,0FFFFFFFFFD,000,1 L
7643121,0000000,7643097,A,7643122DA,0FFFFFFFFFD,000,1 N
7644107,0000000,7643097,A,7644108DA,0FFFFFFFFFD,000,1 L
7643123,0000000,7643097,A,7643124DA,0FFFFFFFFFD,000,1 Z
7643127,0000000,7643097,A,7643128DA,0FFFFFFFFFD,000,1 N
7643119,0000000,7643097,A,7643120DA,0FFFFFFFFFD,000,1 4
7644113,0000000,7643097,A,7644114DA,0FFFFFFFFFD,000,1 Z
7643129,0000000,7643097,A,7643130DA,0FFFFFFFFFD,000,1 6
7643131,0000000,7643097,A,7643132DA,0FFFFFFFFFD,000,1 P
7643125,0000000,7643097,A,7643126DA,0FFFFFFFFFD,000,1 B
8646492,0000000,7641033,A,8646493DA,0FFFFFFFFFD,000,1 H
7644111,0000000,7643097,A,7644112DA,0FFFFFFFFFD,000,1 N

ISTAP does not always update an ECU especially if the ECU family changed somewhere along the line. Found that out with a GM gearbox so I went into the data files and manually searched all the ZUSBs that were compatible with the hardware then flashed it. I think original family was GM1916 in INPA. Found hardware compatibility with family GKE211, searched for vin compatibility then flashed it. Was an interesting exercise.

[Bimmer540]

I checked with Ista-p and indeed no update available for EGS.

I thought that every update of Ista-p all modules were updated again.

Is it possible to check that in advance?

[inspi1981]

Why updates for all modules, when there is no interest from BMW develop site. New software only for modules, where they found some security issue