Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO Flash with 3.62.5
16-05-2018, 11:07 AM,
Post: #51
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
I'm also experiencing the VO lock. Tried to change the region from US to ECE, which failed. But now there is no going back. VO coding with original FA still doesn't work.
Is there anyone who can help me with this? |
|||
17-05-2018, 22:03 PM,
Post: #52
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
contact me - I can help.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
18-05-2018, 23:18 PM,
Post: #53
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(16-05-2018, 11:07 AM)Florissilfhout Wrote: I'm also experiencing the VO lock. Tried to change the region from US to ECE, which failed. But now there is no going back. VO coding with original FA still doesn't work. Remove all SALAPA entries and just leave 609 in FA. Code HU That's it. (At least for me it worked in this way). |
|||
22-05-2018, 09:48 AM,
(This post was last modified: 22-05-2018, 10:35 AM by Florissilfhout.)
Post: #54
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(18-05-2018, 23:18 PM)CeyLive Wrote:(16-05-2018, 11:07 AM)Florissilfhout Wrote: I'm also experiencing the VO lock. Tried to change the region from US to ECE, which failed. But now there is no going back. VO coding with original FA still doesn't work. Thanks for your input, however, tried this and still WDBI_PLAIN error shows up And more concerning, I am unable to flash the HU_NBT2. When calculating TAL and showing all the ECU's which could be updated, the nbt is not on that list. I am using latest PSdZData (4.10.42 Full). |
|||
09-10-2018, 02:59 AM,
(This post was last modified: 09-10-2018, 03:01 AM by dncomputech.)
Post: #55
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(22-05-2018, 09:48 AM)Florissilfhout Wrote:(18-05-2018, 23:18 PM)CeyLive Wrote:(16-05-2018, 11:07 AM)Florissilfhout Wrote: I'm also experiencing the VO lock. Tried to change the region from US to ECE, which failed. But now there is no going back. VO coding with original FA still doesn't work. Hi everybody I retrofit NBT EVO ID5 / 6 (03-17 HB209 FW: 3.1) for F10 2016 with Entrynav I considered the wiring diagram here for F10 2016 has Entrynav: https://www.newtis.info/tisv2/a/en/f10-5...1VnYlIxcRp I saw pin 9 (ETH_A 0.35 GE) yellow wire {29 (A42 * 1B)} from Entrynav connected to ZGW pin 13 (A51 * 3B) For NBT EVO I do not see (ETH_A 0.35 GE). So if NBT EVO ID5 / 6 retrofit (ETH_A 0.35 GE) is not used? I have attached the NBT EVO to the car without the ethernet connection (OABR) NBT EVO to the car, and i got the EVO NBT Flash failed. But still see NBT EVO when connecting OBD through E-sys and Cooding success I think. ethernet connection (OABR) NBT EVO is only for Flash. if everyone wronged me |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content