Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
OPCOM problem conecting
31-10-2018, 20:25 PM,
Post: #1
|
|||
|
|||
OPCOM problem conecting
hello guys
im having a problem with my OPCOM to conect my opel combo c 1.7 di from 2001 first my op com was 1.95 firmware and i have instaled the 1.39 and now i using 1.45 firmware, and none of them could make the conection with my ECU this is my cable PCB https://www.dropbox.com/sh/8rvv7i7pgpmfe...6Bjma?dl=0 i dont know what to do more anybody can help me? thank you |
|||
31-10-2018, 21:14 PM,
Post: #2
|
|||
|
|||
RE: OPCOM problem conecting
(31-10-2018, 20:25 PM)CrossMan Wrote: hello guys Hello your interface is high quality clone ive used it on your exact model before can pull pin and code keys etc Can you connect to any other unit apart from ecu ? Check obd fuse and socket for power If mine or others posts and info are helpful please give thanks/rep
|
|||
31-10-2018, 22:26 PM,
Post: #3
|
|||
|
|||
RE: OPCOM problem conecting
the obd fuse is ok and i have power in my obd port
a friend as a wow wurth original and he conected with my ecu throught opel corsa 1.7 di from 2005 in is software.....so probably it is not a lack of power.... by the way what is the best firmware for this cable? |
|||
01-11-2018, 09:24 AM,
(This post was last modified: 01-11-2018, 09:25 AM by dil6222.)
Post: #4
|
|||
|
|||
RE: OPCOM problem conecting
(31-10-2018, 22:26 PM)CrossMan Wrote: the obd fuse is ok and i have power in my obd port Hello ok so can discount the obd port and fuse then Does your pass test interface on setting menu ? And there is no best firmware really latest usable firmware is 1.64 But end up using different firmware for different jobs For instance if you use 1.39 on your van you can pull the code from dash but need your interface to work normally I'm thinking along the lines of the white Kline controller on your opcom board you tried it on a car that use can bus Yet? If mine or others posts and info are helpful please give thanks/rep
|
|||
01-11-2018, 10:51 AM,
Post: #5
|
|||
|
|||
RE: OPCOM problem conecting
Check your interface settings it should be set at B+B rev if its been set some thing else it will not connect.............
If My Post Was Helpful
Than Please Click On Thanks & Rep.. |
|||
01-11-2018, 16:44 PM,
Post: #6
|
|||
|
|||
RE: OPCOM problem conecting
Yes. It is set as B B+
I have tried the option to identify my van but its says ecu not found. I have tried with can and kwp and its the same. Tomorrow im gonna try in another car. I always do the test to the interface and always shows interface test ok and detect the firmware version. But it doesnt destect any module on my van. i have a friend that as a opel combo 1.3 cdti from 2005 im gonna try to read his ecu eith that cable |
|||
01-11-2018, 17:45 PM,
(This post was last modified: 01-11-2018, 17:47 PM by dil6222.)
Post: #7
|
|||
|
|||
RE: OPCOM problem conecting
(01-11-2018, 16:44 PM)CrossMan Wrote: Yes. It is set as B B+ Well for a start it won't work on can because your vehicle doesn't have it and if it won,t connect to any unit then the Kline relay/controller on your opcom need changing ashraf knows which one I can't remember if off the top of my head Does your opcom click when trying to connect and do the RX TX leds flash at all ? If mine or others posts and info are helpful please give thanks/rep
|
|||
01-11-2018, 19:11 PM,
Post: #8
|
|||
|
|||
RE: OPCOM problem conecting
yes
everytime it changes pin it clicks |
|||
02-11-2018, 01:48 AM,
Post: #9
|
|||
|
|||
RE: OPCOM problem conecting
Change chip 33399 to L9637D
|
|||
02-11-2018, 11:57 AM,
Post: #10
|
|||
|
|||
RE: OPCOM problem conecting
It doesnt conect to any car. Have tryied now in a opel com 1.3 cdti from 2005 and nothing.
I will try to change that component |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content