[rs@chip]

If esys and tool not work, flash it second time by IstaP or D- that was solution in my case in same problem.

yes this will I do but now its on latest I-level ista p wont mark it as flashable..have to use other soft

[NeRkO20]

you can manually select which ECU you want to flash in ISTA+ if u are still on newest I-Level

[simonchs]

Tool32, load the ACSM5.prg, STEUERN(ARG;VERRIEGELUNG_SG;0)
let the car sleep and clear the fault.

[tokarszczak]

If esys and tool not work, flash it second time by IstaP or D- that was solution in my case in same problem.

yes this will I do but now its on latest I-level ista p wont mark it as flashable..have to use other soft

You can manual type acsm and select to program it in IstaP

[rs@chip]

unfortunaly I have only latest Ista-p left I delite old one and as you now programing F+G moved to ista+ ,only E-series left in..does anyone now how to enable Expert mode (single module programing) in ista+?aniway I will try acsm5.prg also

[NeRkO20]

hmm...can´t find the screenshot....but you have to generate mesaurement plan...and then in one of the tabs you have the options....done 3 days ago