Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA/P ICOM connection problem
05-11-2018, 16:23 PM,
Post: #1
|
|||
|
|||
ISTA/P ICOM connection problem
I could use some help on the following; I cannot connect ISTA/P 3.65.1.002 to my E91 via ICOM A2. I have spend quite some hours already, though without success.
1. I have successfully worked with ISTA+ (ISTA/D 4.13.14); it connects fine without problem via the ICOM A2. 2. I have connected direct from ICOM A2 to laptop via ethernet cable 3. The ICOM A2 has 169.254.94.38 (found via ItoolRadar) 4. I have given my laptop address 169.254.94.1 (sub 255.255.0.0) 5. Not sure if I should use Itoolradar or not (at least I am able to reserve 169.254.94.38). 6. The ICOM has firmware version 1.41 and is a clone. 7. I am using ISTA/P loader 6.3 (without emulator) 8. I can ping the ICOM successfully via CMD. 9. ISTA/P does not give a green/red battery indication. Terminal 15 and 30 are empty. 10. Using WIN7 32Bit, defender and firewall disabled. So, why is INPA and ISTA/D working and ISTA/P not? Anybody some suggestions where to find the answer? |
|||
05-11-2018, 19:04 PM,
Post: #2
|
|||
|
|||
RE: ISTA/P ICOM connection problem
Do you have VM-Ware on your PC?
Then please deactivate the virtual networks and all is fine… BMW F07 535ix GT (09/16)
BMW E61 530xi touring (07/05) BMW E39 528i (10/97) BMW E36 323i touring (03/99) Suzuki GSX750S Katana (1985) |
|||
05-11-2018, 20:40 PM,
Post: #3
|
|||
|
|||
RE: ISTA/P ICOM connection problem
|
|||
05-11-2018, 22:47 PM,
Post: #4
|
|||
|
|||
RE: ISTA/P ICOM connection problem
U need to update firmware in Icom
|
|||
06-11-2018, 06:10 AM,
(This post was last modified: 06-11-2018, 06:11 AM by willisodhiambo.)
Post: #5
|
|||
|
|||
RE: ISTA/P ICOM connection problem
|
|||
06-11-2018, 06:58 AM,
(This post was last modified: 06-11-2018, 07:02 AM by Bimmer540.)
Post: #6
|
|||
|
|||
RE: ISTA/P ICOM connection problem
6. The ICOM has firmware version 1.41 "that's good!"
Try to set network adapter from pc to automatic IP. And do not reserve Icom with Itoolradar for Ista-p. Disable wifi connection. |
|||
09-04-2019, 22:53 PM,
Post: #7
|
|||
|
|||
RE: ISTA/P ICOM connection problem
Hi
I had this problem. I did 3 things 1. Flash latest firmware via http://169.254.92.38:60080 FLASH BOTH boot and application files firmware now 3.15.02 application 1.41 2. I set a fixed address 169.254.92.38 3. via web interface http://169.254.92.38:58000 set Mode = ISPI-Next I can now use any loader - 6.1 to 6.4 I can switch in and out of Ista/D and IstaP and the iTool radar shows the icom being reserved and free automatically - no need to do anything. Just remember to close session properly in ISTA/d or ISTA/P to have it unlock itself Good luck |
|||
12-04-2019, 17:09 PM,
Post: #8
|
|||
|
|||
RE: ISTA/P ICOM connection problem
Hey, I have a problem with ICOM connection. I recently bought a new original ICOM from BMW dealer.
First connection and iTool Radar detected ICOM, connected to BMW E60 via ISTA / D, I read errors, deleted and disconnected. Then I worked on this computer by VMware from NCS Expert. Today, unfortunately, I can not connect via ICOM. The LAN light is on, the network is identified and iToolRadar does not show anything. What can I do to fix it? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content