[Silva1337]

Hello im retrofiting from acc to cc with 544
car is 2006y , i have mounted another szl with cruise control stalks
have coded kombi dsc szl kgm kbm , it wont work i dont get any errors , 
i can see in ista that stalk is working perfectly, also i disconnected acc eye, tryed remove white module from front fuse box , fuse , coding to 540 nothing helps
help appreciated

[inotherwords]

There is no 544 on pre-LCI cars, you need to recode it to 540 first of all. And why did you change entire szm instead of changing stalk only? Also there is no LDM module on preLCI cars.

[inspi1981]

I think variant must be reset, but I don't know how

[Silva1337]

i have solved my problem
soliuton update egs
ive also reseted variant but dont know if it required

[diagnosiks]

I think variant must be reset, but I don't know how

yep inspi1981 is right.

Sometimes the DME/DDE don´t forget that it canot find the disconnected ACC anymore.

What you have to do is to open your fitting DME.prg file with Toolsset.

-then run -status_variante-

-Now you see  a list with all DME/DDE features with activated (1) or disacivated (0)

In your case ACC should gave you an 1

-Now run -steuern_variante-to update the features. But dont forget, that the ACC should be cut off the PT-CAN!!!

-If you check again with status your ACC should give you a 0 back.

Now your DME/DDE knows that there is no ACC anymore!

Best Regards





If my post helped you, then don't forget to press thanks and add a reputation.

[Silva1337]

yes i have made that one too, but dont thought thatproblem can be in egs sw
only what i can say not dme.prg just need enter d_motor.grp then tools32 selects automaticaly which your car have

[smercki]

I think variant must be reset, but I don't know how

yep inspi1981 is right.

Sometimes the DME/DDE don´t forget that it canot find the disconnected ACC anymore.

What you have to do is to open your fitting DME.prg file with Toolsset.

-then run -status_variante-

-Now you see  a list with all DME/DDE features with activated (1) or disacivated (0)

In your case ACC should gave you an 1

-Now run -steuern_variante-to update the features. But dont forget, that the ACC should be cut off the PT-CAN!!!

-If you check again with status your ACC should give you a 0 back.

Now your DME/DDE knows that there is no ACC anymore!

Best Regards





If my post helped you, then don't forget to press thanks and add a reputation.

I retrofit the nivi (night vision) in my F11 and I had to remove the radiator gate, but it is always present on ista error on DDE unlinked motor, I think that this procedure can solve my problem too?

[GorylAliasGonzo]

I disconnect ACC change SZL recoded everything and made a change with Tool32 as diagnosiks says but I have an error present in DDE till today is working fine you don't see error on dashboard but is still there.