[pforms]

Hi I use vvdi mb to make new key 2007 e350 all key lost. I read EIS dump ST12 with vvdi prog, got prepared key files online then write key slot #6.Every thing look OK but can not turn key. I use china BE key . When I look at current key harsh it does not match to the key harsh in EIS dump file. I tried renew key and write it again with same result. I even wrote back the dump file that I  originally read it first and used it to generated key files.Same thing. not work.Could you  masters show me how to copy the current key harsh into the eis. or show me what bI did wrong. I click key V51. If that would cause problem? Thank you.

[raffy haddad]

hello
is remote function work ?
if yes check the steering lock
and sometimes the key is damaged
try change key and write it in different location
regards

[pepi]

Upload your EZS dump so that we can generate new keys for compare.

[pforms]

Hello could you please generate key file for this  eis #2115452308 Car is 2007 E350 key version don't know It is all key lost and I use china BE key. Thank

[pepi]

Hello could you please generate key file for this  eis #2115452308 Car is 2007 E350 key version don't know It is all key lost and I use china BE key. Thank

Here are the keys.

[pforms]

Thank you Pepi but your key file is same as mine. The current key harsh is different from the EIS dump key track but I found them both in key  file  .Where do you think is the problem? Cheap key or something wrong with programmer or EIS . remote don't work as well. thank

[bersch8688]

Done yesterday W211 2005 all without problem.
Try to change Slot in EIS, try slot 3,4,5,7 or 8

[pepi]

Thank you Pepi but your key file is same as mine. The current key harsh is different from the EIS dump key track but I found them both in key  file  .Where do you think is the problem? Cheap key or something wrong with programmer or EIS . remote don't work as well. thank

The calculation is 100% OK , check your programmer or keys.If you are using chinese IR programmer you will have to prepare dump before you write.

[pforms]

       

Thank you Pepi but your key file is same as mine. The current key harsh is different from the EIS dump key track but I found them both in key  file  .Where do you think is the problem? Cheap key or something wrong with programmer or EIS . remote don't work as well. thank

The calculation is 100% OK , check your programmer or keys.If you are using chinese IR programmer you will have to prepare dump before you write.

Thank you for trying to help. can you help put the current key harsh in my EIS dump please.Thank