[led25]

Hello.

I succeeded in installing bench mode,
but, no image is displayed on the display.
Not no signal...
In esys, the module is normal.
Coding is also possible.
It does not output video only.

Is there a procedure to run bench mode?

[bmwcoder75]

Hello.

I succeeded in installing bench mode,
but, no image is displayed on the display.
Not no signal...
In esys, the module is normal.
Coding is also possible.
It does not output video only.

Is there a procedure to run bench mode?

Code screen output correctly in Evo unit and/or use a voltage regulator too if appropriate

[led25]

Hello.

I succeeded in installing bench mode,
but, no image is displayed on the display.
Not no signal...
In esys, the module is normal.
Coding is also possible.
It does not output video only.

Is there a procedure to run bench mode?

Code screen output correctly in Evo unit and/or use a voltage regulator too if appropriate

Thank you for your comment

Display voltage in my car is 11.9v
Bench mode display voltage is 11.7v
not different...
I tested the voltage down to 9.5v, but it was the same


Changing CID_APIX_MODE coding to apix2 results in no signal
Mini Cooper f54 nbt evo Default is apix1


I have two nbt evo id4 and id5
The display also has two id4 and id5 touches.

Both of them do not display any screens.